UEEEL0052 — Maintain and service traction lift systems and equipment
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for UEEEL0052 must cover
36 assessable components: 3 elements (12 performance criteria), 9 performance evidence and 15 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Prepare service lift equipment
- 1.1WHS/OHS requirements and workplace procedures for a given work area are identified and applied
- 1.2WHS/OHS risk control measures and workplace procedures in preparation for the work are followed
- 1.3Scope of work to be undertaken is identified from maintenance workplace procedures or fault/breakdown reports and/or discussions with appropriate person/s
- 1.4Advice is sought from work supervisor to ensure work is coordinated effectively with others
- 1.5Tools, equipment and testing devices needed to carry out service work are obtained in accordance with workplace procedures and checked for correct operation and safety
2 Service lift equipment
- 2.1WHS/OHS risk control measures and procedures for carrying out service work are followed
- 2.2Need to test or measure live electrical work is determined in accordance with WHS/OHS requirements and conducted in accordance with workplace safety procedures
- 2.3Circuits/machines/plant are checked and isolated in accordance with WHS/OHS requirements and workplace procedures
- 2.4Safety hazards resulting from fault/s or breakdown are documented on job safety assessments, risks assessed and risk control measures implemented in consultation with appropriate person/s
3 Complete and report service activities
- 3.1WHS/OHS work completion risk control measures and workplace procedures are followed
- 3.2Reusable, faulty or worn components are inspected, tagged and despatched for repair to maintain adequate spares in accordance with workplace procedures
- 3.3Maintenance work activities are documented in accordance with workplace procedures
Performance evidence
- applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures and practices, including using of risk control measures
- applying sustainable energy principles and practices
- completing and reporting lift system servicing activities
- carrying out lift safety gear periodic testing
- conducting site cleaning and lubricating of lift equipment
- dealing with unplanned events in accordance with workplace procedures in a manner that minimises risk to personnel and equipment
- inspecting lift ropes
- maintaining electro-hydraulic lift equipment
- planning to maintain and service lift systems
Knowledge evidence
- lubricant selection for lift components, including: cooling and viscosity; corrosion protection and friction reduction; lubricant loss and loss estimation; suitable oils, greases, coolants, rust preventatives and solvents for particular devices
- lubricant application for lift components, including hand grease guns, oil cans and misters, pressure and automatic lubricators, lubrication points, level indicators and estimating quantities
- lift systems: single and multiple wrap roping; types of ropes and their attachments, including hoisting, governor, tappet, compensator, selector, normal and Langs lay rope, standard ends attachments, splices, wedge sockets, Talurit fitting, Babbit sockets and Secon fitting
- lift system rope inspection, including: corrosion, lubrication and tension; lift systems basic rope inspection; purpose; rope stretch; wear, broken strands, diameter and deformation
- rope stretch, including counterweight clearance and compensatory equipment
- inspection of rope attachments, including: deformation and remedial action; rope anchor rods, castings and springs; wedges, swaging and checking for fracturing
- inspection of sheaves, including groove condition, rifling, ropes down in sheaves and maintenance records
- maintenance, replacement and adjustment of mechanical lift components, including: air cords, selectors and tapes/chains; bearings: roller, sleeve, guide shoes and slipper; car and landing doors, locks and guides; well, pit and motor room equipment
- relevant job safety assessments or risk mitigation processes
- relevant manufacturer specifications
- relevant requirements of lift code/enterprise
- relevant WHS/OHS legislated requirements
- relevant workplace documentation including authorisations permit parts/component, components fault report/s, despatch and store records, and test results
- relevant workplace policies and procedures
- sustainable energy principles and practices
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing UEEEL0052
What does an assessment tool for UEEEL0052 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEEEL0052 needs to address all 36 unit components: 3 elements with 12 performance criteria, 9 performance evidence requirements, 15 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for UEEEL0052?
Auditori pulls the current release of UEEEL0052 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEEEL0052 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing UEEEL0052 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEEEL0052, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
- UEEEL0001 — Apply compliance requirements to all aspects of electrical work
- UEEEL0002 — Apply currency of safe working practices and compliance verification of electrical installations
- UEEEL0003 — Arrange circuits, control and protection for electrical installations
- UEEEL0004 — Carry out basic repairs to electrical components and equipment
- UEEEL0005 — Develop and connect electrical control circuits
- UEEEL0006 — Develop detailed and complex drawings for electrical systems using CAD systems
- UEEEL0007 — Develop detailed electrical drawings
- UEEEL0008 — Evaluate and modify low voltage heating equipment and controls
- UEEEL0009 — Evaluate and modify low voltage lighting circuits, equipment and controls
- UEEEL0010 — Evaluate and modify low voltage socket outlets circuits
- UEEEL0011 — Evaluate performance of low voltage electrical apparatus
- UEEEL0012 — Install low voltage wiring, appliances, switchgear and associated accessories
Your UEEEL0052 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate UEEEL0052 free