UEEEL0009 — Evaluate and modify low voltage lighting circuits, equipment and controls

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate UEEEL0009 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for UEEEL0009 must cover

74 assessable components: 3 elements (16 performance criteria), 16 performance evidence and 42 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Prepare to work on lighting circuits

1.1Scope of work is obtained from relevant documentation, electrical drawings or relevant person/s
1.2WHS/OHS requirements and workplace procedures for a given work area are identified and applied
1.3Hazards are identified, risks are assessed and control measures are implemented
1.4Advice is sought from work supervisor to ensure the work is coordinated effectively with others
1.5Sources of materials required for work are determined in accordance with workplace procedures
1.6Tools, equipment and testing devices required to carry out work are obtained and checked for correct operation and safety

2 Evaluate and modify lighting circuits

2.1Equipment and circuits are checked and arrangement identified
2.2Circuits are checked and isolated in accordance with workplace procedures and regulatory requirements
2.3The need to test or measure live work is determined in accordance with WHS/OHS requirements and when necessary conducted in accordance with workplace procedures
2.4Fault/s and probable cause/s are identified from measured and calculated values as they apply to lighting equipment
2.5Required components are identified and replaced in accordance with manufacturer specifications and industry standards
2.6Unexpected situations are dealt with safely and with the approval of relevant person/s

3 Complete work and document activities

3.1WHS/OHS work completion risk control measures and workplace procedures are followed
3.2Worksite is cleaned and made safe in accordance with workplace procedures
3.3Justification for solutions used to modify circuits and equipment is documented
3.4Work completion is documented and an appropriate person/s notified in accordance with workplace procedures

Performance evidence

# applying work health and safety (WHS)/occupational health and safety (OHS) workplace procedures, including:
# identifying and assessing hazards and risks, and implementing control measures
# checking circuits are isolated in accordance with workplace procedures and regulatory requirements
# determining the operating parameters of existing lighting circuits and equipment
# modifying existing lighting circuits and their controls to comply with specified operating parameters, including drawing and connecting lighting circuits that incorporate:
one-way
two-way
# intermediate switching of light points using the loop at the light/switch methods of thermoplastic sheathed (TPS) wiring
# developing lighting circuits and equipment to comply with a specified function and operating parameters
# determining the cause of low illuminance level in existing lighting circuits and equipment
determining conditions causing existing lighting circuits and equipment to be unsafe
# connecting lighting equipment and controls
# identifying faulty components in luminaires and auxiliary/control equipment from test results
# testing luminaires and auxiliary/control equipment for serviceability
ensuring all work complies with relevant Australian Standards and legislation
completing work and documenting activities.

Knowledge evidence

loop at the light method of wiring lighting circuits
loop at the switch method of wiring lighting circuits
installation methods of accessories and wiring for a lighting circuit incorporating one-way, two-way and intermediate switching of lighting points using the loop at the light/switch method of TPS wiring
TPS cabling requirement for the loop at the light/switch circuit
correct operation of the installed circuits including testing for compliance with industry standards
emergency and evacuation lighting and lighting control, including:
factors and requirements of emergency and evacuation lighting concerning illumination levels, luminaire positioning and operating period
characteristics of maintained, non-maintained and sustained emergency lighting systems
arrangement of batteries in point and central bank emergency lighting supply systems
lighting control methods
principles of lighting technology, including:
basic electrical terminology
colour theory
lighting techniques
local Supply Authority requirements for maintaining high power factor
terminology, principles and standards relevant to lighting (energy efficiency as per National Construction Code (NCC))
types of luminaires:
different types of luminaires, their features and purpose
operation of different types of luminaires
expected lamp life, colour rendering and efficacy for typical types of different types of luminaires
lighting circuits, equipment and controls used for the following applications:
commercial
industrial
domestic
lighting layout in terms of visual comfort and relevant Australian Standards
Australian Standards and local requirements for lighting
light-emitting diode (LED) lighting and its applications
Neon, Argon and Xenon lighting and their applications
comparison of incandescent, low intensity discharge, high intensity discharge, LED and other types of lighting
fire protection – residential fire and smoke alarms, including:
types of fire and smoke alarms
regulations and standards requirements regarding residential fire and smoke alarms
locations for residential fire and smoke alarms
wiring methods for residential fire and smoke alarms
operation of typical residential fire and smoke alarms
identifying faults in luminaires and auxiliary/control equipment, including circuit and wiring diagrams of common lighting circuits, including:
common fault symptoms and associated causes
common faults in luminaires and auxiliary/control equipment
techniques for repairing/replacing faulty lighting components
input and output parameters of equipment incorporating electronic components for; controlling/switching lighting, auxiliary control equipment, energy measurement and control, rectifying and inverting electrical supplies
hazards and safety requirements related to equipment incorporating electronic components used in electrical systems
relevant manufacturer specifications.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing UEEEL0009

What does an assessment tool for UEEEL0009 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEEEL0009 needs to address all 74 unit components: 3 elements with 16 performance criteria, 16 performance evidence requirements, 42 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEEEL0009?

Auditori pulls the current release of UEEEL0009 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEEEL0009 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEEEL0009 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEEEL0009, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your UEEEL0009 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate UEEEL0009 free