Auditori
Get started

UEEEL0007 — Develop detailed electrical drawings

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate UEEEL0007 freeSee a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for UEEEL0007 must cover

104 assessable components: 3 elements (15 performance criteria), 13 performance evidence and 76 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Prepare to develop detailed electrical drawing

  • 1.1Work health and safety (WHS)/occupational health and safety (OHS) procedures for a given work area are identified, obtained and applied
  • 1.2WHS/OHS risk control measures and procedures in preparation for the work are followed
  • 1.3Detailed electrical drawings are determined from the scope of work to be undertaken
  • 1.4Electrical drawing details required for work to be undertaken are obtained from project specifications and in accordance with workplace procedures
  • 1.5Appropriate person/s is consulted to ensure the work is coordinated effectively with others
  • 1.6Software, tools and equipment for work are obtained in accordance with workplace procedures

2 Develop detailed electrical drawing

  • 2.1WHS/OHS risk control measures and workplace procedures for carrying out the work are followed
  • 2.2Detailed electrical drawings design and layout requirements are determined from project specifications
  • 2.3Technical data of electrical system components are interpreted to determine parameters included in the detailed electrical drawings
  • 2.4Appropriate software tools are used to produce detailed electrical drawings based on workplace procedures
  • 2.5Detailed electrical drawings are checked for accuracy in accordance with workplace procedures and project specifications
  • 2.6Unplanned situations are responded to in accordance with workplace procedures in a manner that minimises risk to personnel and equipment

3 Complete detailed electrical drawing documentation

  • 3.1Completed detailed electrical drawings are submitted to appropriate person/s to be checked for accuracy in accordance with workplace procedures and project specifications
  • 3.2Alterations, additions or correction instructions are followed and detailed electrical drawings are re-submitted for final approval
  • 3.3Completed detailed electrical drawings are filed securely in accordance with workplace procedures

Performance evidence

  • applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements, including using risk control measures
  • completing detailed electrical drawings documentation and presenting preliminary and final drafts for verification, including:
  • applying, storing and retrieving data related requirements
  • digitising and scanning drafting/drawings products
  • producing related documentation for presentations
  • preparing and developing detailed electrical drawings, including:
  • applying electrical equipment design drawing methods, techniques, procedures and protocols and documenting design
  • applying project specifications
  • interpreting and using technical data and specifications
  • producing drafting documentation
  • producing drawing sets
  • using advanced computer-aided design (CAD) systems and commands
  • using relevant drafting peripheral systems, equipment and tools to develop detailed drawings

Knowledge evidence

  • project specifications
  • relevant industry standards
  • relevant job safety assessments or risk mitigation processes
  • relevant manufacturer specifications
  • relevant software tools and equipment
  • relevant WHS/OHS legislated requirements
  • relevant workplace documentation and file storage, including digitising and scanning
  • relevant workplace policies, procedures and instructions
  • producing final drafts for verification, including:
  • principles, purpose and concept of verification of drafting products encompassing:
  • production of electrical drawings for verification by authorised persons, production of drawing sets, production of related documentation and presentations of final drafts
  • processes and procedures related to the verification of final drafts by authorised persons encompassing accuracy
  • publication of verified electrical drawings
  • detailed electrical drawing production, including:
  • distribution branch circuits and boards, services and load calculations encompassing panels (high voltage (HV)/low voltage (LV))/switchboards/motor control centres/final
  • conductor/cable selection and calculations encompassing:
  • electrical, data and communications
  • overcurrent and overvoltage protection
  • cable support systems encompassing:
  • cable trays, trunking, conduits, ducts, guards, saddles, carriers, raceways/cavities and poles
  • box and fitting fill requirements
  • wiring devices and terminations
  • distribution equipment encompassing:
  • power circuit devices
  • distribution system transformers encompassing:
  • specialty transformers and power circuit devices
  • lighting applications encompassing:
  • lamps, ballasts and components
  • motors encompassing:
  • functional controls, advanced motor controls, motor calculations and motor maintenance arrangements
  • hazardous areas encompassing electrical equipment; classification of emergency standby systems encompassing uninterrupted power supply (UPS)/inverter and battery banks
  • fire alarm systems
  • HV terminations/splices
  • cable size selection for installation cable run
  • cable sizes, voltage drops, conduit sizes, fault levels, fuse/circuit breaker sizes and working temperatures
  • short circuit calculations
  • earth-loop impedance compliance test arrangements on the completed design
  • touch potentials calculations
  • cable schedules creation
  • single line and as built drawings encompassing:
  • three phase schematic colour diagrams, marked up cable calculations, short circuit results and earth-loop impedance results
  • quantities parts list and drawings for tender drawings issued by electrical consultants/engineers
  • coordination and discrimination studies
  • building management systems (BMS), including:
  • building information modelling and sustainable design
  • fuse and circuit breaker trip curves, plots and displays
  • troubleshooting/fault finding
  • detailed panel layouts, including:
  • detailed panel layouts creation
  • din rail tool
  • terminal strip editor
  • detailed panel layout annotation
  • detailed reports
  • schematic component commands, including:
  • schematic symbols editor
  • schematic editor
  • components from lists
  • connectors
  • terminals: multiple level and jumpers
  • circuits
  • multiple phase circuits
  • schematic editing, including:
  • advanced utilities
  • copy catalogue and location
  • values
  • swapping and updating blocks
  • using the auditing tools
  • update and retag drawings
  • digitising and scanning, including:
  • drawings: digitisation - tablet and software configuration, tablet and puck, grids set-up and alignment marks for various size drawings, software parameters setting, and hard copy drawings digitisation to tablet parameters
  • digitised drawing editor, manipulation and save
  • digitise and grid set-ups and alignment marks on a hard copy of a large drawing (e.g. A1)
  • scanning devices and peripherals set-up encompassing associated software usage, save (e.g. file formats for use other software applications) and management
  • drawing hard copy scan
  • scanned image conversion to vector format, edit and save in file formats for use in CAD encompassing:
  • importation of scanned images into CAD drawings in image formats for editing

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing UEEEL0007

What does an assessment tool for UEEEL0007 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEEEL0007 needs to address all 104 unit components: 3 elements with 15 performance criteria, 13 performance evidence requirements, 76 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEEEL0007?

Auditori pulls the current release of UEEEL0007 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEEEL0007 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEEEL0007 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEEEL0007, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your UEEEL0007 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate UEEEL0007 free