UETDRIS026 — Diagnose and resolve faults in electrical apparatus

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate UETDRIS026 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for UETDRIS026 must cover

87 assessable components: 3 elements (18 performance criteria), 14 performance evidence and 55 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Prepare to diagnose and resolve faults in electrical apparatus

1.1Legislation, regulations, standards, codes of practice and organisational workplace requirements for the work to be done are reviewed and determined
1.2Work plan is obtained, confirmed and communicated with relevant personnel in accordance with workplace requirements
1.3Work is prioritised and sequenced for completion in accordance with work plan and workplace requirements
1.4Hazards are identified, risks assessed, and control measures identified and applied
1.5Work permits are determined in accordance with workplace requirements
1.6Plant, tools, equipment and personal protective equipment (PPE) required for work are determined, obtained and confirmed in working order

2 Diagnose and resolve faults in electrical apparatus

2.1Legislation, regulations, standards, codes of practice and organisational workplace requirements for the work to be performed are applied and monitored
2.2Lifting, working at heights, working in confined spaces and the use of plant, tools, equipment and PPE are carried out in accordance with workplace requirements
2.3Work permits are received and signed in accordance with workplace requirements
2.4Faults in electrical apparatus are diagnosed and resolved in accordance with workplace requirements
2.5Hazard control measures are monitored in accordance with workplace requirements
2.6Incidents or unplanned events are responded to in accordance with workplace requirements
2.7Quality checks of work are undertaken in accordance with work plan and workplace requirements

3 Complete work and documentation

3.1Completed work is checked for compliance against the work plan and workplace requirements
3.2Incidents or unplanned events are reported in accordance with workplace requirements
3.3Plant, tools and equipment are cleaned, checked and returned to storage, and surplus resources and materials are managed in accordance with workplace requirements
3.4Work permits are signed off in accordance with workplace requirements
3.5Work records, reports and documentation are completed, and appropriate personnel notified in accordance with workplace requirements

Performance evidence

applying relevant legislation, regulations, standards, codes of practice and organisational workplace requirements including:
work health and safety (WHS)/occupational health and safety (OHS) requirements
identifying hazards, assessing risks, and identifying, applying and monitoring control measures
obtaining, inspecting and using relevant personal protective equipment (PPE)
dealing with an unplanned event on at least one (1) occasion
obtaining and signing work permits in accordance with workplace requirements
completing relevant work records, reports and documentation
diagnosing and resolving faults in electrical apparatus, including:
applying logical diagnostic methods
using fault scenarios to test the cause of system faults
identifying faults and competency needed to resolve them
resolving faults in system controls
verifying that the system operates correctly
documenting fault rectification

Knowledge evidence

relevant legislation, regulations, standards, codes of practice and organisational workplace requirements including WHS/OHS requirements
hazard, risk assessment and risk control requirements
types and application of PPE
safe use of plant, tools and equipment
application, purpose and types of permits
events constituting an unplanned event or incident
procedures for responding to an unplanned event or incident
workplace records, reports and documentation
control of high voltage (HV) and low voltage (LV), including:
voltage control devices
conditions leading to voltage collapse and system disintegration
voltage regulators applied to generators and synchronous phase modifiers
electromagnetic voltage regulators
series and parallel capacitors
on-load tap changer (OLTC) transformers
static var compensations (SVCs)
range of devices covered by SVCs, including:
saturated reactor (SR) compensators
thyristor controlled reactor (TCR) compensators
combined TCR/thyristor-switched capacitor (TSC)
production of wave-form distorting harmonics and control devices
importance of the location in the system of voltage control devices
the use of graphical methods to calculate the size of var regulating plant
control of power, including:
base load and spinning reserve
regulating machines
rapid start plant
phase shifting transformers and load shedding
principles and practices of automated control of individual machines
stations and transmission/tie-line elements
synchronising power
the relationship between power and frequency, including:
limiting values
machine stabilising
steam by-pass, rapid valving, slip stabilisers and over-speed limiting
use of single pole generator circuit breakers (CB)
use of automatic voltage regulators (AVR) as angular stabilisers
damped and un-damped system oscillations
relationship between fault clearance times and system stability
calculation of critical clearance angles based on equal area criteria
types of communication systems, including:
telephone, power line carrier, dedicated cable, microwave links and fibre optics
quantities and signals to be communicated
advantages and disadvantages of the various systems
equipment requirements
transient over-voltages in power systems, including:
switching and lightning over-voltages and their effect on different plant items
transient over-voltage control and reduction using surge diverters, shield wires and CB control
insulation systems, insulation coordination, insulation grading in plant items, bushings and capacitor bushings
factors leading to the generation of corona, including consequences, reduction, conductor bundling, grading rings and conductor surface treatment
power system protection, including:
location of current transformer (CT) in major plant items
earthing principles and devices
fault current control/limitation using neutral earthing compensators (NEC), neutral point earth impedances, high conductivity shield wires and parallel feed interlocking
application of different types of protection

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing UETDRIS026

What does an assessment tool for UETDRIS026 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UETDRIS026 needs to address all 87 unit components: 3 elements with 18 performance criteria, 14 performance evidence requirements, 55 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UETDRIS026?

Auditori pulls the current release of UETDRIS026 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UETDRIS026 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UETDRIS026 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UETDRIS026, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your UETDRIS026 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate UETDRIS026 free