RIICBM305E — Install pre-cast concrete bridge decks
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for RIICBM305E must cover
81 assessable components: 5 elements (23 performance criteria), 8 performance evidence and 47 knowledge evidence requirements, plus 3 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1. Plan and prepare to install pre-cast concrete bridge deck
- 1.1Obtain, interpret, clarify and confirm work instructions
- 1.2Access, interpret and apply documentation required to install pre-cast concrete bridge decks and confirm work activity is compliant
- 1.3Obtain and interpret emergency procedures, and identify steps required to respond to emergencies
- 1.4Select and wear personal protective equipment according to site requirements
- 1.5Confirm and identify requirements for complying with environmental protection, safety and traffic management signage requirements
- 1.6Identify, address and report hazards, risks and environmental issues
- 1.7Select plant, tools and equipment required to carry out tasks and check for faults
- 1.8Identify, confirm, and locate materials required for work application
2. Install bearing
- 2.1Determine bearing types and position according to job requirements
- 2.2Confirm quality of bearing dimensions and material
- 2.3Install bearings according to job and site requirements
- 2.4Identify locating brackets and install according to job requirements
3. Install deck components and grout
- 3.1Prepare deck components for grouting
- 3.2Place deck components according to job requirements
- 3.3Carry out pre-cast concrete decking grouting according to job requirements
- 3.4Insert and tension pre-cast concrete decking transverse stressing bar according to job requirements
- 3.5Grout transverse stressing bar
- 3.6Grout anchor bolts
- 3.7Place and specify deck joints of pre-cast decking and scuppers according to job requirements
4. Fix bridge fittings
- 4.1Fit posts and bridge rails according to job requirements
- 4.2Assemble and install pre-fabricated stairs according to job requirements
5. Conduct clean-up activities
- 5.1Clear work area and dispose of or recycle materials according to site requirements
- 5.2Clean, check, perform maintenance on and store plant, tools and equipment according to manufacturer specifications and site requirements
Performance evidence
- install pre-cast concrete bridge decks on at least two occasions, including:
- installing pre-cast concrete deck units including installation of transverse stressing bars and bearings on a multi-span bridge with a minimum length of twenty metres to specifications.
- During the above, the candidate must:
- locate and apply required legislation, documentation, policies and procedures
- identify, report and record hazards and risks
- work with others to install pre-cast concrete bridge decks that meets required outcomes, including:
- communicating with others to receive and clarify work instructions
- using communication techniques and equipment to convey information to others, including signage to advise others of work activity and exclusion zones.
Knowledge evidence
- legislation required to install pre-cast concrete bridge decks
- policies, procedures and documentation required to install pre-cast concrete bridge decks, including those relating to:
- hazard and risk management
- emergency response
- site and equipment safety
- environmental protection
- waste management
- communication techniques and equipment
- safe lifting techniques
- safe working procedures, working at heights and over water
- site isolation and traffic control responsibilities
- operational, maintenance and basic diagnostic procedures
- project quality requirements
- job plans and specifications
- site requirements
- manufacturer specifications for required plant and equipment
- workplace reporting requirements
- principles and techniques required to install pre-cast concrete bridge decks, including those relating to:
- bridge construction and sequencing
- pre-cast concrete bridge deck components, including:
- bridge rails
- pre-cast kerbing
- stairs
- posts
- hand rails
- deck joints
- deck installation
- bearing types, including:
- elastomeric
- mortar pad
- bearing installation
- concrete
- grout application
- epoxy and mortar application and removal
- interpreting engineering drawings
- types, characteristics, technical capabilities and limitations of plant and equipment required to install pre-cast concrete bridge decks including:
- fall arrestors
- tag lines
- pneumatic wrenches and drills
- ladders
- lifting equipment
- power saws
- slings
- scaffolding
- materials safety data sheets (SDS) compliance processes
- components of job safety analyses (JSAs), job safety environmental analyses (JSEAs), and safe work method statements (SWMs)
- civil construction terminology relating to installing pre-cast concrete bridge decks.
Foundation skills
- Oral communication: Identifies and interprets information from verbal instructions Conveys information and instructions to others verbally
- Self-management: Monitors and minimises own exposure to worksite risks and hazards during work activities
- Teamwork: Works with others to complete tasks
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing RIICBM305E
What does an assessment tool for RIICBM305E need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for RIICBM305E needs to address all 81 unit components: 5 elements with 23 performance criteria, 8 performance evidence requirements, 47 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for RIICBM305E?
Auditori pulls the current release of RIICBM305E from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for RIICBM305E — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing RIICBM305E assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of RIICBM305E, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
- RIICBM201E — Strip pile heads
- RIICBM301E — Maintain concrete bridges
- RIICBM302E — Install pre-cast girders
- RIICBM303E — Install pre-cast parapets
- RIICBM304E — Operate bridge inspection units
- RIICBM306E — Undertake concreting work on concrete bridges
- RIICBM307E — Construct formwork and false work on concrete bridges
Your RIICBM305E assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate RIICBM305E free