MSFGG2016 — Assemble glazing products
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for MSFGG2016 must cover
24 assessable components: 4 elements (15 performance criteria), 2 performance evidence and 7 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Identify work requirements and components
- 1.1Read work documentation and identify assembly requirements
- 1.2Identify and follow work health and safety requirements
- 1.3Plan a logical work sequence suited to the job and workplace procedures
2 Prepare for assembly
- 2.1Select and check tools and equipment for suitability, serviceability and safety prior to use
- 2.2Select and confirm component parts against specifications
- 2.3Check measurements for accuracy, legibility and tolerance, and note and position mating or directional marks
- 2.4Set up assembly tools and equipment in accordance with production objectives, manufacturer instructions and workplace procedures
3 Assemble components
- 3.1Lay out and assemble components ensuring conformity to specifications, alignment and appropriate fastening
- 3.2Attach hardware and fixings in accordance with specifications
- 3.3Reveal product once assembled in accordance with job requirements
- 3.4Inspect completed product for compliance with specifications and quality requirements, and repair, reprocess or discard in accordance with workplace procedures
4 Complete work
- 4.1Label and store completed products in accordance with workplace procedures and Australian Standards
- 4.2Clean work area and safely dispose of waste
- 4.3Remove and store tools, equipment and unused materials in accordance with workplace procedures
- 4.4Accurately complete required workplace documentation
Performance evidence
- assembled 3 of the following types of glazing products with relevant hardware in accordance with job requirements: double hung, casement, sashless sliding pack, showerscreen framed or semi-frameless, sliding, wardrobe
- installed all of the following component hardware to products (this may require product in addition to those above): weather seals, wheels, stays, hinges, guides, locks
Knowledge evidence
- Australian Standards AS 2047: (Sections 6, 7 and 8)
- glazing product assembly: workplace safety system requirements, work flow, characteristics, uses and limitations of different products, how to interpret processing requirements from different types of work documentation
- types, characteristics, safe use, maintenance and limitations of fabrication tools and equipment: assembly benches, copy routers, electric and pneumatic powered drills and screwdrivers, end millers, frame and sash tooling, hand tools, hydraulic and manual presses, pleuws guns, pneumatic, pop rivet guns, saws, including drop and upcut
- type, characteristics, uses and limitations of other materials used in assembly: fasteners (screws and pop rivets), gaskets, hardware, plastics, sealants, tapes, timber reveals, vinyl
- techniques for product assembly, the types of problems that may occur and how to avoid and respond
- quality indicators for assembled products
- procedures for the recording, reporting and maintenance of workplace records and information
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing MSFGG2016
What does an assessment tool for MSFGG2016 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MSFGG2016 needs to address all 24 unit components: 4 elements with 15 performance criteria, 2 performance evidence requirements, 7 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for MSFGG2016?
Auditori pulls the current release of MSFGG2016 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MSFGG2016 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing MSFGG2016 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MSFGG2016, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
- MSFGG2011 — Glaze and reglaze residential windows and doors
- MSFGG2012 — Operate glass freefall rack and table
- MSFGG2013 — Move single glass sheets by mechanical means
- MSFGG2014 — Cut thin glass by hand
- MSFGG2015 — Process glass by basic machines
- MSFGG2017 — Fabricate and install insect and security screens
- MSFGG3022 — Construct and repair leadlight panels
- MSFGG3023 — Apply and handle films
- MSFGG3024 — Form glass
- MSFGG3025 — Apply patterns and designs to glass
- MSFGG3026 — Laminate glass
- MSFGG3027 — Toughen glass
Your MSFGG2016 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate MSFGG2016 free