CPCSHP3007 — Install prefabricated internal shopfitting units

1 Plan and prepare to install prefabricated internal shopfitting units.

• 1.1Read and interpret plans and specifications to confirm job requirements.
• 1.2Interpret and apply organisational quality assurance requirements appropriate for the project.
• 1.3Receive and check delivered materials for completeness and conformity with job requirements and identify and report any damage.
• 1.4Unload delivered internal shopfitting units, place in safe area onsite ready for installation, and protect unit finishes from damage.
• 1.5Determine job priorities and sequence job tasks in consultation with others in the workplace.
• 1.6Inspect workplace conditions, identify and report hazards, and implement risk control measures.
• 1.7Select, fit and use personal protective equipment (PPE) required for the task.
• 1.8Select tools and equipment and check for serviceability.
• 1.9Conduct a pre-start check and rectify and report faults.

2 Check location of units and prepare for installation.

• 2.1Set out and mark position for installation, strike datum to check level, and plumb and confirm with original site measurements.
• 2.2Remove protrusions, install structural elements required to support the shopfitting unit and prepare positon for unit installation.
• 2.3Level and plumb irregularities to meet job requirements and record any discrepancies.

3 Assemble and fix shopfitting unit.

• 3.1Assemble large unit components in a position for ease of installation.
• 3.2Check overall measurements of assembled unit against specification and address any anomalies.
• 3.3Prepare shopfitting units with drilled holes and check fixings are appropriate to connect to brickwork, timber, metal and stone surfaces.
• 3.4Install assembled unit and pack level, plumb and square using appropriate levelling equipment and process.
• 3.5Anchor assembly at drilled connecting points, fit and align doors with specified parallel gaps.
• 3.6Scribe and fix beading and apply sealants to meet job requirements and specifications.
• 3.7Remove excessive sealant, protective covering and masking tape, and clean marks and markings from unit.

4 Clean up.

• 4.1Clear work area, and dispose of, reuse or recycle materials following workplace and environmental requirements.
• 4.2Clean tools and equipment, check for serviceability and report damage or faults.
• 4.3Store and secure tools and equipment following workplace procedures.

What does an assessment tool for CPCSHP3007 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for CPCSHP3007 needs to address all 37 unit components: 4 elements with 22 performance criteria, 4 performance evidence requirements, 11 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for CPCSHP3007?

Auditori pulls the current release of CPCSHP3007 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for CPCSHP3007 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing CPCSHP3007 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of CPCSHP3007, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.