CPCSHP3002 — Fabricate and assemble shopfront structures

1 Undertake on-site measurements

• 1.1Identify, read and interpret work plans and specification to confirm job requirements.
• 1.2Implement on-site work health and safety requirements.
• 1.3Locate on-site datum, gridlines and reference points from site plan.
• 1.4Use levelling techniques to check surrounding structures and surfaces for plumb, level, line and square.
• 1.5Measure and record internal width and height dimensions.
• 1.6Mark position of proposed frames and fittings on surrounding structure using non-permanent marker.
• 1.7Note, rectify and report inconsistencies to appropriate person in dimensions, layout or location of structure outside the specified tolerances.
• 1.8Notify glazier of site measurements for glass.

2 Plan and prepare for the project.

• 2.1Inspect and identify offsite work area hazards and conditions and implement risk control measures.
• 2.2Prepare detailed working drawings from design drawings to comply with job requirements.
• 2.3Prepare an efficiency cutting plan and list and calculate materials for the project.
• 2.4Determine job priorities and sequence job tasks in consultation with others in the workplace.
• 2.5Select, fit and use personal protective equipment (PPE) required for the task.
• 2.6Identify, obtain, safely handle, prepare and locate materials ready for use.
• 2.7Set out components following workplace procedures.
• 2.8Select tools and equipment and check for serviceability.
• 2.9Conduct a pre-start check and rectify and report faults.

3 Fabricate project components.

• 3.1Produce specified components using static machines in accordance with job and organisational quality requirements.
• 3.2Program CNC machine to manufacturer and produce specified components.
• 3.3Test CNC machine program operations in dry run simulation mode, and edit program and alarm settings as required, using the control station.
• 3.4Recognise minor faults and problems with CNC machine operation, and select and apply appropriate action to overcome issues and meet project schedules.
• 3.5Produce specified work pieces using CNC machine automatic mode.
• 3.6Cut straight and curved lines in small sections of glass.
• 3.7Check components for correct measurements and compliance with quality and job requirements.

4 Assemble components of shopfront structure.

• 4.1Select appropriate area to lay out and assemble material components.
• 4.2Use appropriate fixings and fasteners to assemble frame and check overall dimension for conformity with location and design.
• 4.3Check frame for parallel and square and adjust as required.
• 4.4Laminate required areas and fix fittings to components.
• 4.5Assemble shopfront free of scratches, dents, blemishes and damage.

5 Prepare for transport to worksite.

• 5.1Disassemble shopfront components that are too large for transport to worksite or too heavy for safe lifting, into smaller sections.
• 5.2Identify and arrange packaging requirements for separate components and sections.
• 5.3Label and place components and sections in an appropriate workplace area in preparation for collection and transport to site.
• 5.4Number assembly diagram and locate for inclusion in delivery instructions.

6 Clean up.

• 6.1Clean CNC and static machinery, tools and equipment, check for serviceability and report damage or faults.
• 6.2Clear work area and dispose of, reuse or recycle materials following workplace and environmental requirements.
• 6.3Store and secure tools and equipment following workplace procedures.

What does an assessment tool for CPCSHP3002 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for CPCSHP3002 needs to address all 88 unit components: 6 elements with 36 performance criteria, 6 performance evidence requirements, 46 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for CPCSHP3002?

Auditori pulls the current release of CPCSHP3002 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for CPCSHP3002 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing CPCSHP3002 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of CPCSHP3002, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.