CPCPPS5014 — Locate and maintain piping systems

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate CPCPPS5014 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for CPCPPS5014 must cover

29 assessable components: 3 elements (15 performance criteria), 4 performance evidence and 10 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Evaluate design parameters.

1.1Establish scope of work for locating and maintaining hydraulic and plumbing systems.
1.2Determine relevant design requirements from relevant Australian standards, codes, plans, specifications and in accordance with work health and safety (WHS) and environmental requirements.
1.3Identify and plan tasks in conjunction with others involved in or affected by the work and statutory and regulatory authorities’ requirements.
1.4Evaluate impact of works on buildings and structural elements and underground services.
1.5Analyse and apply the National Construction Code (NCC), statutory and regulatory requirements and Australian standards for the scope of works.
1.6Apply sustainability principles and concepts throughout the design process.
1.7Establish performance requirements considering safety of system users or building occupants.
1.8Interpret manufacturer requirements, trade and technical manuals to comply with design parameters.
1.9Conduct cost-benefit analysis comparing a range of pipe materials and system designs.

2 Plan and assess systems.

2.1Identify and analyse applications of maintaining hydraulic and plumbing systems.
2.2Specify approved materials, methods and installation requirements for maintaining hydraulic services.

3 Prepare documentation.

3.1Prepare a client brief for the preferred system of maintaining hydraulic and plumbing systems.
3.2Prepare plans and specifications for a range of scenarios relating to maintaining hydraulic and plumbing systems.
3.3Prepare testing and commissioning schedule.
3.4Produce operation and maintenance manual.

Performance evidence

pipe-freezing of an existing 100 mm copper water mains requiring a new 100 mm tee connection
a sewer line inspection using closed-circuit television (CCTV) drain camera equipment through a sewer inspection point and a sewer manhole and the removal of a blockage with high-pressure drain cleaning equipment
use of under-road boring equipment to install a 150 mm sewer line across a local council road containing a minimum of two lanes in width
an approved trenchless robotic and chemical repair system to incorporate a straight-line section of 100 mm sewer pipe and a 100 mm sewer junction repair

Knowledge evidence

common terminology and definitions used in the specification of piping system maintenance procedures
nature of materials used and effects of performance under various conditions
requirements of state and territory regulatory authorities, Australian Standards and manufacturer specifications, including hazards identified in relation to devices and systems used
applications for pipe and servicing locating equipment
uses and limitations of pipe-freezing equipment
uses and limitations of sewer and drain cameras
uses and limitations of under-road boring equipment
uses and limitations of trenchless, robotic sewer repair and chemical grout systems including re-lining
uses and limitations of high-pressure drain cleaning equipment
safety procedures relating to maintaining hydraulic and plumbing systems

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing CPCPPS5014

What does an assessment tool for CPCPPS5014 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for CPCPPS5014 needs to address all 29 unit components: 3 elements with 15 performance criteria, 4 performance evidence requirements, 10 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for CPCPPS5014?

Auditori pulls the current release of CPCPPS5014 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for CPCPPS5014 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing CPCPPS5014 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of CPCPPS5014, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your CPCPPS5014 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate CPCPPS5014 free