UEPMNT312 — Maintain industrial pressure vessels

1 Plan and prepare for work

• 1.1Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
• 1.2Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work
• 1.3Resources are obtained and inspected for compliance with job specification
• 1.4Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures
• 1.5Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with job specification
• 1.6Work is planned sequenced, prioritised, in accordance with workplace procedures
• 1.7Potential hazards are identified and risk control measures are selected and implemented, in accordance with workplace procedures
• 1.8Work area is prepared, in accordance with workplace procedures

2 Remove associated equipment to facilitate maintenance

• 2.1Associated equipment isolation and depressurisation is confirmed visually and manually, as required, in accordance with workplace procedures
• 2.2Pressure vessel is disconnected, in accordance with the workplace procedures
• 2.3Pressure vessel’s associated equipment is removed, in a manner which will assist in replacement, in accordance with workplace procedures
• 2.4Pressure vessel is inspected for abnormalities, in accordance with workplace procedures

3 Dismantle and maintain pressure vessel

• 3.1Hazardous material is identified and arrangements are made for clearance from pressure vessel and work site, in accordance with workplace procedures and legislative requirements
• 3.2Internal and external components are systematically dismantled, marked and recorded, in accordance with workplace procedures
• 3.3Components are refurbished, catalogued and stored for reassembly, in accordance with workplace procedures and manufacturers’ specifications
• 3.4Gasket and seal requirements are assessed, manufactured or obtained, in accordance with workplace procedures and manufacturers’ specifications
• 3.5Vessel mountings are maintained, as required, in accordance with workplace procedures and manufacturers’ specifications
• 3.6Internal piping or tubing is tested and expanded or replaced, as required, in accordance with workplace procedures and manufacturers’ specifications

4 Reassemble pressure vessel

• 4.1Internal and external components are systematically reassembled, in accordance with workplace procedures and manufacturers’ specifications
• 4.2Associated equipment is aligned and replaced, in accordance with workplace procedures
• 4.3Fastenings are torqued, in accordance with manufactures’ specification and workplace procedures
• 4.4Vessel is pressure tested, monitored and adjusted, if required, in accordance with workplace procedures, and legislative requirements

5 Complete work

• 5.1Work is completed and appropriate personnel are notified, in accordance with workplace procedures
• 5.2Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
• 5.3Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
• 5.4Work completion details are finalised, in accordance with workplace procedures

What does an assessment tool for UEPMNT312 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEPMNT312 needs to address all 58 unit components: 5 elements with 26 performance criteria, 14 performance evidence requirements, 18 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEPMNT312?

Auditori pulls the current release of UEPMNT312 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEPMNT312 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEPMNT312 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEPMNT312, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.