UEPMNT010 — Maintain wind turbine control systems

1 Plan and prepare for work

• 1.1Requirements, including scope of work and assigned roles, are identified and confirmed with appropriate personnel or by site inspection in accordance with workplace procedures
• 1.2Work health and safety (WHS)/occupational health and safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ recommendations and specifications, environmental requirements and workplace procedures are reviewed in preparation for work
• 1.3Resources are obtained and inspected for compliance with job specification
• 1.4Relevant plans, drawings and manuals are selected and used in accordance with workplace procedures
• 1.5Work is planned, sequenced and prioritised in accordance with workplace procedures
• 1.6Isolations are requested, if required, in accordance with workplace procedures
• 1.7Work area is prepared in accordance with workplace procedures

2 Conduct maintenance on wind turbine control system components

• 2.1Faulty control system components are replaced in accordance with manufacturers’ recommendations and specifications, and workplace procedures
• 2.2Documented service checklists, or similar, are followed in accordance with workplace procedures
• 2.3Diagnostic testing and data from monitoring systems are used to identify those components requiring maintenance
• 2.4Control system components are dismantled for maintenance, if required, in accordance with manufacturers’ recommendations and specifications, and workplace procedures
• 2.5Approved maintenance techniques are used to enable identification or reassembly of components in accordance with workplace procedures
• 2.6New components are obtained and inspected for compliance with manufacturers’ recommendations and specifications in accordance with workplace procedures
• 2.7Control system components are tested, monitored and adjusted, as required, in accordance with manufacturers’ recommendations and specifications, and workplace procedures

3 Complete work

• 3.1Work is completed and appropriate personnel are notified in accordance with workplace procedures
• 3.2Work area is cleared of waste, cleaned, restored and secured in accordance with workplace procedures
• 3.3Tools and equipment are maintained and stored in accordance with workplace procedures
• 3.4Work completion details are finalised in accordance with workplace procedures

What does an assessment tool for UEPMNT010 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEPMNT010 needs to address all 41 unit components: 3 elements with 18 performance criteria, 12 performance evidence requirements, 11 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEPMNT010?

Auditori pulls the current release of UEPMNT010 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEPMNT010 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEPMNT010 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEPMNT010, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.