UEPMNT303 — Maintain mechanical valves

1 Plan and prepare for work

• 1.1Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
• 1.2Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work
• 1.3Resources for work activities are obtained and inspected for compliance with the job specification
• 1.4Relevant plans, drawings and manuals are selected and used, in accordance with the work procedures
• 1.5Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with job specification
• 1.6Work is planned, sequenced and prioritised, in accordance with workplace procedures
• 1.7Potential hazards are identified and risk control measures are selected and implemented, in accordance with workplace procedures
• 1.8Work area is prepared, in accordance with workplace procedures

2 Remove mechanical valves for maintenance

• 2.1Isolations are confirmed, where appropriate, in accordance with workplace procedures
• 2.2Mechanical valve is disconnected, in accordance with workplace procedures
• 2.3Mechanical valve is removed, in a manner which will assist in replacement, in accordance with the workplace procedures
• 2.4Mechanical valve is inspected for abnormalities, in accordance with the workplace procedures

3 Perform mechanical valve maintenance

• 3.1Maintenance is performed, in accordance with manufacturers’ specification and workplace procedures
• 3.2Mechanical valve is dismantled, clearly marked for identification, and relevant sketches are drawn, in accordance with workplace procedures
• 3.3Components are prepared for reassembly, in accordance with manufacturers’ drawings and/or manuals and workplace procedures
• 3.4New components are inspected, in accordance with workplace procedures, to ensure compliance with manufacturers’ specification
• 3.5Dimensional inspection is performed with precision measuring devices, in accordance with workplace procedures, to ensure compliance with manufacturers’ specification and
• 3.6Components are reassembled for testing, in accordance with manufacturers’ specification and workplace procedures
• 3.7Modifications and/or alterations are undertaken, in accordance with manufacturers’ specification and workplace procedures
• 3.8Components are levelled, aligned, coupled and connected, in accordance with manufacturers’ specifications and workplace procedures
• 3.9Valves are pressure tested, monitored and adjusted, if required, in accordance with manufacturers’ specifications and workplace procedures

4 Replace or install mechanical valves

• 4.1Equipment is prepared for valve replacement, in accordance with workplace procedures
• 4.2Mechanical valve is replaced, in accordance with manufacturers’ specification and workplace procedures
• 4.3Mechanical valve is connected, in accordance with manufacturers’ specification and workplace procedures
• 4.4Final inspection is completed, in accordance with workplace procedures

5 Complete work

• 5.1Work is completed, and appropriate personnel are notified, in accordance with workplace procedures
• 5.2Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
• 5.3Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
• 5.4Work completion details are finalised, in accordance with workplace procedures

What does an assessment tool for UEPMNT303 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEPMNT303 needs to address all 66 unit components: 5 elements with 29 performance criteria, 18 performance evidence requirements, 19 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEPMNT303?

Auditori pulls the current release of UEPMNT303 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEPMNT303 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEPMNT303 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEPMNT303, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.