UEERA0098 — Inspect, test and repair fire and smoke control features of mechanical services systems

1 Prepare to conduct safety checks and routine service activities

• 1.1WHS/OHS risk control measures and procedures for carrying out the work are obtained and implemented in accordance with workplace procedures
• 1.2Relevant legislation, codes and standards are identified and obtained
• 1.3Facility specific approved design, drawings, baseline data and other relevant information as required are identified and obtained
• 1.4Routine service or inspection cycle or schedule and responsibilities are determined in compliance with statutory requirements and standards
• 1.5Log-sheet of safety and/or operational checks, inspections, tests and routine service action requirements are obtained or created
• 1.6Details of any reported defects are obtained
• 1.7Required tools, instruments, equipment and resources are determined
• 1.8Personnel required to complete system testing are organised and scheduled allowing sufficient time to meet work instructions

2 Perform safety measures inspections and tests

• 2.1Inspection and test tools, instruments or equipment are obtained
• 2.2Tools, instruments and equipment for correct operation and calibration if required are checked
• 2.3Safety measures inspections and tests on individual components or sections and systems are performed
• 2.4Inspections and tests in compliance with legislation, codes, standards and OHS/WHS requirements and responsibilities are carried out

3 Carry out safety measures routine service

• 3.1Routine service work in compliance with legislation, codes, standards and OHS/WHS requirements and responsibilities are carried out
• 3.2Equipment, machines and plant are isolated and checked where necessary in strict accordance with WHS/OHS requirements
• 3.3Routine service tasks are carried out according to regulatory requirements without compromising the integrity of the building or environmental requirements
• 3.4Routine service personnel required to perform the tasks are coordinated in an efficient and effective manner
• 3.5Responsibility boundaries with other routine service participants are observed
• 3.6Unexpected situations are addressed by reference to job specifications, building management procedures and discussion with appropriate personnel
• 3.7Defects and faults are identified and reported, and rectification recommended
• 3.8Plant, systems and equipment are checked for correct operation on completion of routine service tasks
• 3.9System devices/components are reset and reinstated as fully operational

4 Develop and maintain records

• 4.1Notes and/or complete checklists of the inspections, tests and routine service carried out are prepared in accordance with regulatory requirements and timeframes
• 4.2Notes, checklists and updated log sheets are collated and readily accessible on site
• 4.3Safety checks, routine service and yearly condition reports are signed off and reports submitted to building manager and/or owner
• 4.4Tools and equipment are checked for faults, wear or damage and rectified or problems reported according to workplace requirements
• 4.5Client site is left in clean and tidy condition

What does an assessment tool for UEERA0098 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEERA0098 needs to address all 48 unit components: 4 elements with 26 performance criteria, 11 performance evidence requirements, 11 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEERA0098?

Auditori pulls the current release of UEERA0098 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEERA0098 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEERA0098 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEERA0098, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.