UEERA0049 — Install and start up single head split air conditioning and water heating heat pump systems

1 Prepare to assemble, install and start up split air conditioning and water heat pump system

• 1.1WHS/OHS hazards, risk control methods, relevant standards, codes and legislation are obtained and applied in accordance with workplace procedures
• 1.2Safety hazards which have not previously been identified are assessed, reported and advice on risk control measures sought from supervisor
• 1.3Work activities are sequenced in accordance with job schedule
• 1.4Relevant person/s is consulted to ensure the work is coordinated effectively with others involved on the worksite
• 1.5Layout of pipe work to be installed is determined from job/task details, including manufacturer specifications and diagrams
• 1.6Materials needed to carry out the work are obtained in accordance with workplace procedures and checked against job/task requirements
• 1.7Tools, equipment and testing devices are obtained in accordance with workplace procedures and checked for operation and safety
• 1.8Appropriately licensed electrician is confirmed to carry out electrical work for the air conditioning and water heat pump system
• 1.9Appropriately licensed plumber is confirmed to carry out mains water piping work for the heat pump hot water system
• 1.10Preparatory work is checked to ensure no damage has occurred and complies with job/task requirements in accordance with workplace procedures

2 Assemble, install and start up split air conditioning and water heat pump system

• 2.1Split air conditioning and water heat pump system components are positioned and assembled in accordance with workplace procedures, manufacturer instructions and industry standards
• 2.2Interconnecting refrigerant piping/tubing is prepared and installed in accordance with workplace procedures, manufacturer instructions and industry standards
• 2.3Components are pressure tested and evacuated in strict accordance with manufacturer instructions, industry standards and codes of practice
• 2.4Condensate drains are prepared and installed to the units in accordance with workplace procedures, manufacturer instructions, industry standards and local regulatory requirements
• 2.5The refrigerant service valves are opened on the pre-charged outdoor unit to enable the refrigerant to enter the evacuated pipe work and the connected unit in strict accordance with manufacturer instructions and industry standards
• 2.6Unplanned situations are discussed with relevant person/supervisor, documented and dealt with safely in accordance with workplace procedures
• 2.7Quality checks of installation and start-up are undertaken in accordance with workplace procedures
• 2.8Notification is given to relevant person/s that the split air conditioning and water heat pump system is ready for electrical and/or mains water connection in accordance with workplace procedures
• 2.9Split air conditioning and water heat pump work is carried out efficiently without waste of materials or damage to apparatus, circuits, the surrounding environment or services using relevant workplace sustainable energy principles in accordance with workplace procedures

3 Test single head split air conditioning and water heat pump system

• 3.1Split air conditioning and water heat pump system performance is inspected and tested in accordance with workplace procedures to ensure compliance with industry technical standards, manufacturer specifications and job/task requirements
• 3.2Worksite and equipment are cleaned and made safe in accordance with workplace procedures
• 3.3Work completion is documented and appropriate person/s notified in accordance with workplace procedures

4 Decommission split air conditioning and water heat pump system

• 4.1Refrigerant is pumped down and/or recovered from indoor unit, interconnecting refrigerant piping/tubing is removed, and indoor and outdoor refrigerant circuits are sealed in accordance with workplace procedures, manufacturer instructions and industry standards
• 4.2Licensed electrician is engaged in accordance with workplace procedures to isolate and disconnect electrical supply and cabling from air conditioning and water heat pump system
• 4.3Indoor and outdoor refrigerant pipework, water pipework, condensate drains and electrical conduits/cables are unmounted in accordance with workplace procedures
• 4.4Unplanned situations are discussed with appropriate person/s, documented and dealt with safely in accordance with workplace procedures
• 4.5Split air conditioning and water heat pump work is carried out efficiently without waste of materials or damage to apparatus, circuits, the surrounding environment or services using relevant workplace sustainable energy principles
• 4.6Worksite and equipment are cleaned and made safe in accordance with workplace procedures
• 4.7Work completion is documented and appropriate person/s notified in accordance with workplace procedures

What does an assessment tool for UEERA0049 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEERA0049 needs to address all 65 unit components: 4 elements with 29 performance criteria, 17 performance evidence requirements, 19 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEERA0049?

Auditori pulls the current release of UEERA0049 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEERA0049 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEERA0049 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEERA0049, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.