UEEIC0038 — Solve problems in density/level measurement components and systems
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for UEEIC0038 must cover
80 assessable components: 3 elements (16 performance criteria), 12 performance evidence and 52 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Prepare to work on density/level measurement components and system
- 1.1Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are obtained and applied
- 1.2Hazards are identified, risks assessed and control measures implemented
- 1.3Nature of the density/level measurement problem is identified from documentation or appropriate person/s to determine the scope of work to be undertaken
- 1.4Appropriate person/s is consulted to ensure work is coordinated effectively with others
- 1.5Materials required for the work are determined in accordance with workplace procedures
- 1.6Tools, equipment and testing devices needed to carry out the work are obtained and checked for correct operation and safety in accordance with workplace procedures
2 Solve density/level measurement problems
- 2.1WHS/OHS risk control work measures and workplace procedures are followed
- 2.2Need to inspect, test or measure electrical components of live electrical work is determined in accordance with job requirements and workplace safety procedures
- 2.3Density/level measurement apparatus is checked and isolated in accordance with WHS/OHS requirements and workplace procedures
- 2.4Relevant methods are used to solve measurement problems from tests and calculated values as they apply to density/level measurement systems
- 2.5Unplanned situations are responded to in accordance with workplace procedures and with the approval of an authorised person/s
- 2.6Problems are resolved using sustainable energy principles and without damage to apparatus, the surrounding environment or services in accordance with workplace procedures
3 Complete work and document work activities
- 3.1WHS/OHS work completion risk control measures and workplace procedures are followed
- 3.2Worksite is cleaned and made safe in accordance with workplace procedures
- 3.3Justification for solutions used to resolve density/level measurement problems is documented
- 3.4Work completion is documented and appropriate person/s notified in accordance with workplace procedures
Performance evidence
- applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements, including applying safe working practices
- applying sustainable energy principles and practices
- cleaning and making work site safe
- completing work and documenting work activities
- dealing with unplanned events/situations in accordance with workplace procedures in a manner that minimises risk to personnel and equipment
- documenting completed work
- implementing risk control measures
- obtaining tools, equipment and testing devices
- determining work on density/level measurement components and systems
- solving density/level measurement problems
- solving problems in density/level measurement systems
- working with density/level apparatus
Knowledge evidence
- introduction to level/density measurement. including:
- definitions density and relative density (sg)
- application
- factors affecting density
- density measurement
- Archimedes principle
- density calculations
- types and applications of level/density transducers
- transducers input/outputs (I/O) - measurement and evaluation
- transducer connections
- level/density measurement techniques sight type, including:
- dipstick and hook gauges
- tubular and flat glass gauges
- accuracy of flat glass gauges
- magnetically coupled gauges
- float level measuring devices
- application of float devices
- level/density measurement - force type techniques, including:
- comparison of float and displacement type systems
- interface sensing devices
- torque tube type displacer operation
- torque tube type displacer construction
- pneumatic and electronic transmitters
- level/density measurement - pressure-type techniques, including:
- diaphragm level detectors
- applications of diaphragm level detectors
- differential pressure cells advantages and disadvantages
- density measurement using D/P cells
- level/density measurement - electrical type techniques, including:
- application of conductance probes
- operation of a conductivity-level controller
- resistance tapes level detectors
- capacitance probes level detectors
- ultrasonic level detectors
- microwave-based level detectors
- nucleonic-type level sensors
- load cells used for level measurement
- level/density measurement - non-intrusive type techniques, including:
- radiation-type density sensor
- hydrometer element used for density measurement
- vibrating tube type liquid density meter
- level/density measurement calibration for:
- D/P cell calculations
- D/P calibration
- open tank installation level measurement
- problem solutions in density/level measurement systems
- relevant job safety assessments or risk mitigation processes, including risk control measures
- relevant manufacturer specifications
- relevant WHS/OHS legislated requirements
- relevant workplace documentation
- relevant workplace policies and procedures
- safe working practices
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing UEEIC0038
What does an assessment tool for UEEIC0038 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEEIC0038 needs to address all 80 unit components: 3 elements with 16 performance criteria, 12 performance evidence requirements, 52 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for UEEIC0038?
Auditori pulls the current release of UEEIC0038 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEEIC0038 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing UEEIC0038 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEEIC0038, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
- UEEIC0001 — Analyse complex electronic circuits controlling fluids
- UEEIC0002 — Assemble, enter and verify operating instructions in microprocessor equipped devices
- UEEIC0003 — Assist in commissioning process and instrumentation control systems
- UEEIC0004 — Calibrate, adjust and test measuring instruments
- UEEIC0005 — Configure and maintain industrial control system networks
- UEEIC0006 — Design and configure Human-Machine Interface (HMI) networks
- UEEIC0007 — Design and use advanced programming tools, PC networks and HMI Interfacing
- UEEIC0008 — Design electronic control systems
- UEEIC0009 — Develop an electrical integrated system interface for access through a touch screen
- UEEIC0010 — Develop and test code for microcontroller devices
- UEEIC0011 — Develop electrical integrated systems
- UEEIC0012 — Develop structured programs to control external devices
Your UEEIC0038 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate UEEIC0038 free