Auditori
Get started

UEEIC0006 — Design and configure Human-Machine Interface (HMI) networks

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate UEEIC0006 freeSee a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for UEEIC0006 must cover

53 assessable components: 3 elements (18 performance criteria), 15 performance evidence and 20 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Select and design HMI control system network

  • 1.1Work health and safety (WHS)/occupational health and safety (OHS) processes and workplace procedures for a given work area are identified, obtained and applied
  • 1.2Hazards are identified, WHS/OHS risks assessed, and control measures and workplace procedures are implemented in preparation for work
  • 1.3Scope of HMI control system network is determined from network specifications/design brief and in consultation with relevant person/s
  • 1.4Activities are planned to meet scheduled specifications/design brief timelines in consultation with person/s involved in the work
  • 1.5Management tools and software are selected based on specified requirements and performance standards
  • 1.6Strategies are implemented to ensure network development is carried out efficiently

2 Install, configure and manage HMI control system network

  • 2.1WHS/OHS risk control measures and workplace procedures for carrying out work are followed
  • 2.2Network infrastructure components are installed and configured in accordance with industry standards and variants as specified for the network
  • 2.3Structural components of directory services are installed and configured in accordance with industry standards and variants as specified for the network
  • 2.4Management components of network control system are configured in accordance with industry standards and requirements specified for the network
  • 2.5Security components of network control system are created in accordance with industry standards and requirements specified for the network
  • 2.6Network malfunctions/faults are identified and rectified using logical problem-solving techniques of complex network control system infrastructure
  • 2.7Network is monitored and solutions are developed to optimise network performance and reliability in accordance with workplace procedures
  • 2.9Security events are analysed and actions taken in accordance with workplace policies and protocols
  • 2.10Methods for dealing with unplanned issues/problems are analysed to provide the most effective solutions in accordance with workplace procedures
  • 2.11Quality of work is monitored in accordance with performance agreement/specifications and/or workplace procedures or industry standards

3 Report HMI network administration activities

  • 3.1Written justification is produced for HMI network services development activities and relevant person/s notified in accordance with workplace procedures
  • 3.2Network service development records are maintained in accordance with workplace procedures

Performance evidence

  • applying problem-solving techniques
  • applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements, including: • implementing workplace procedures and practices • using of risk control measures
  • applying sustainable energy principles and practices
  • configuring management components of human-machine interface (HMI) network services
  • creating security components of HMI network services
  • dealing with unplanned events/situations in accordance with workplace procedures in a manner that minimises risk to personnel and equipment
  • developing solutions to optimise network performance
  • documenting HMI network services development activities
  • establishing network services to be developed
  • identifying and rectifying HMI network malfunctions/faults
  • installing and configuring network infrastructure components
  • installing and configuring structural components of directory services
  • installing, configuring and managing HMI control system networks
  • preparing to design control system networks
  • reporting network administration activities in accordance with workplace procedures

Knowledge evidence

  • problem-solving techniques and troubleshooting remote access including remote access policy, configuration of remote access profile, virtual private network (VPN), multi-link connection, routing and remote access for dynamic host configuration protocol (DHCP)
  • control system networks interface
  • DHCP
  • HMI control system networks
  • installation, configuring and troubleshooting of internet protocol (IP) routing protocols including updating routing tables and implementing demand-dial routing
  • internet naming services in a network
  • IP routing, including border routing, internal routing and IP routing protocols
  • network address translation (NAT)
  • network infrastructure
  • network protocols
  • open and common proprietary control system networks models (layers) and protocols, including CANopen, ControlNet, devicenet, ethernet, foundation fieldbus, interbus, modbus and pofibus
  • purpose and application of HMI control system networks systems
  • relevant certificate services
  • relevant domain name service (DNS)
  • relevant job safety assessments or risk mitigation processes
  • relevant manufacturer specifications
  • relevant WHS/OHS legislated requirements
  • relevant workplace documentation
  • relevant workplace policies and procedures
  • remote access security including authentication protocols, encryption protocols and access policy

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing UEEIC0006

What does an assessment tool for UEEIC0006 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEEIC0006 needs to address all 53 unit components: 3 elements with 18 performance criteria, 15 performance evidence requirements, 20 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEEIC0006?

Auditori pulls the current release of UEEIC0006 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEEIC0006 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEEIC0006 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEEIC0006, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your UEEIC0006 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate UEEIC0006 free