UEEIC0028 — Provide solutions to problems in industrial control systems
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for UEEIC0028 must cover
72 assessable components: 3 elements (15 performance criteria), 11 performance evidence and 46 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Identify industrial control system problem
- 1.1WHS/OHS requirements and workplace procedures are identified and applied
- 1.2Hazards are identified, risks are assessed and control measures implemented
- 1.3Extent of industrial control system problems are determined from job specifications, situation reports and consultations with relevant person/s
- 1.4Work activities are planned to meet scheduled timelines in consultation with relevant person/s
- 1.5Tools, equipment and testing devices required for work are obtained in accordance with workplace procedures and checked for correct operation and safety
2 Provide solution to industrial control system problem
- 2.1WHS/OHS risk control measures and workplace procedures for carrying out the work are followed
- 2.2Industrial control system devices, circuit operation characteristics and applications are applied to develop solutions to control problems
- 2.3Parameters, specifications and job requirements for each industrial control system problem are obtained in accordance with workplace procedures
- 2.4Industrial control system problems are evaluated to determine most effective solution
- 2.5Unplanned situations are responded to in accordance with workplace procedures in a manner that minimises risk to personnel and equipment
- 2.6Control system problem is resolved using sustainable energy practices without wasting materials, damaging apparatus, surrounding environments or services in accordance with workplace procedures
3 Test and document solution to industrial control system problems
- 3.1WHS/OHS risk control measures and workplace procedures for carrying out the work are followed
- 3.2Solutions to industrial control system problems are tested to determine effectiveness and modified, as required
- 3.3Adopted solutions are documented including instructions incorporating risk control measures
- 3.4Solutions used to solve industrial control system problems are justified and documented in accordance with workplace procedures
Performance evidence
- applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements, including implementing risk control measures
- applying sustainable energy principles and practices
- dealing with unplanned events/situations in accordance with workplace procedures in a manner that minimises risk to personnel and equipment
- determining extent of and evaluating solutions to resolve industrial control system problems
- documenting justification of solutions implemented in accordance established procedures
- meeting scheduled timelines
- obtaining parameter specifications and performance requirements
- preparing to provide solutions to industrial control system problems
- providing solutions to industrial control system problems
- testing and documenting solutions to industrial control system problems
- testing solution to industrial control system problems
Knowledge evidence
- control amplifiers, including:
- introduction
- amplifier operation
- operational amplifiers
- operational amplifier configurations
- industrial transducers, including:
- introduction
- International System of Units (SI)
- forms of energy
- transducer terminology
- temperature measurement
- force measurement
- speed measurement
- positional measurement
- industrial final control elements, including:
- introduction
- electromagnetic devices
- valves
- solid state switching devices
- industrial control systems, including:
- automatic control
- open loop control
- closed loop control
- control system terminology
- control system evaluation
- two position control
- proportional control (P)
- proportional + integral control (P+I)
- proportional + derivative control (P+D)
- proportional + integral + derivative control (P+I+D)
- industrial control loops and control signals, including:
- introduction
- control loops
- converters (digital-to-analogue and analogue-to-digital)
- multiplexing
- circuit operation, characteristics and applications
- industrial control systems problems
- operation and safety of relevant tools, equipment and testing devices
- parameter specifications and performance requirements for control system problems
- relevant job safety assessments or risk mitigation processes, including risk control measures
- relevant manufacturer specifications
- relevant WHS/OHS legislated requirements
- relevant workplace documentation
- relevant workplace policies and procedures
- solutions to industrial control system problems
- sustainable energy principles and practices
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing UEEIC0028
What does an assessment tool for UEEIC0028 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEEIC0028 needs to address all 72 unit components: 3 elements with 15 performance criteria, 11 performance evidence requirements, 46 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for UEEIC0028?
Auditori pulls the current release of UEEIC0028 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEEIC0028 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing UEEIC0028 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEEIC0028, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
- UEEIC0001 — Analyse complex electronic circuits controlling fluids
- UEEIC0002 — Assemble, enter and verify operating instructions in microprocessor equipped devices
- UEEIC0003 — Assist in commissioning process and instrumentation control systems
- UEEIC0004 — Calibrate, adjust and test measuring instruments
- UEEIC0005 — Configure and maintain industrial control system networks
- UEEIC0006 — Design and configure Human-Machine Interface (HMI) networks
- UEEIC0007 — Design and use advanced programming tools, PC networks and HMI Interfacing
- UEEIC0008 — Design electronic control systems
- UEEIC0009 — Develop an electrical integrated system interface for access through a touch screen
- UEEIC0010 — Develop and test code for microcontroller devices
- UEEIC0011 — Develop electrical integrated systems
- UEEIC0012 — Develop structured programs to control external devices
Your UEEIC0028 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate UEEIC0028 free