Auditori
Get started

UEEIC0025 — Provide solutions to extra-low voltage (ELV) electro-pneumatic control systems and drives

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate UEEIC0025 freeSee a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for UEEIC0025 must cover

37 assessable components: 3 elements (16 performance criteria), 11 performance evidence and 10 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Prepare to problem solve electro-pneumatic control systems

  • 1.1WHS/OHS processes and workplace procedures for a given work area are identified, obtained and applied
  • 1.2Hazards are identified, WHS/OHS risks assessed, and control measures and workplace procedures implemented in preparation for work
  • 1.3Safety hazards that have not previously been identified are reported on job safety assessments and advice on risk control measures is sought from relevant supervisor
  • 1.4Control functions and drive system required to perform work are identified and documented from work instructions/specifications, relevant work supervisor or customer
  • 1.5Tools, equipment, inspection and testing devices needed to carry out the work are obtained and checked for correct operation and safety

2 Provide electro-pneumatic control systems solutions

  • 2.1WHS/OHS risk control measures and workplace procedures for carrying out work are followed
  • 2.2Circuits/machines/plant are checked and isolated, as required, in accordance with WHS/OHS requirements and workplace procedures
  • 2.3Circuits for electro-pneumatic control and drive system are developed to meet the required functions and specifications
  • 2.4Locations of control field devices are inspected, checked and adjusted to ensure they function correctly
  • 2.5Circuits for the electro-pneumatic control and drive system component connections are inspected and checked against the developed circuits specifications
  • 2.6Functioning of the systems entering into programmable components and parameters is set in accordance with developed circuit and manufacturer programming instructions/specifications

3 Inspect, test and document electro-pneumatic control systems

  • 3.1Operation of the electro-pneumatic control and drive system is tested in accordance with WHS/OHS requirements and workplace procedures
  • 3.2Operating anomalies are identified and corrected in accordance with workplace procedures
  • 3.3WHS/OHS work completion risk control measures and workplace procedures are followed
  • 3.4Worksite is cleaned and made safe in accordance with workplace procedures
  • 3.5Work completion is reported and appropriate person/s notified in accordance with workplace procedures

Performance evidence

  • establishing and documenting functions that the control and drive system is required to perform
  • developing and documenting circuits for the electro-pneumatic control and drive systems that meet the required functions
  • checking location of control field devices and adjusting to ensure correct functioning
  • checking electro-pneumatic control and drive system components connections
  • entering functions and parameters into programmable components correctly
  • correcting programming anomalies
  • testing and verifying correct operation
  • reporting work completion to appropriate persons in accordance with established procedures
  • dealing with unplanned events
  • applying problem-solving techniques, including: preparing to developing solutions, providing solutions, inspecting, testing and documenting solutions
  • applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements, including: implementing workplace procedures and practices, using of risk control measures

Knowledge evidence

  • electrical and pneumatic control fundamentals, including: electrical and pneumatic safety encompassing: hazardous and safe working methods and procedures, pneumatic operating pressures, isolation procedures; electrical/pneumatic drawing types and applications encompassing: drawing layouts and conventions (electrical and pneumatic schematics, wiring and piping diagrams), drawing symbols; electrical and pneumatic control system components encompassing: electrical components, including power, human-machine interfaces (HMIs), relays, plug and socket connectors; pneumatic components, including air supply systems, HMIs, valves, actuators, tubing and connectors; electrical relay types encompassing: operation, contact configurations; pneumatic control valves and actuators encompassing: types and their operation, activated and deactivated configurations; basic logic as applied to control systems; logic confined to AND, OR, NOT and NOR functions
  • variable speed drive (VSD) functions and configuration
  • VSD functions and set-up, including: basic function of a variable speed drive in controlling an induction motor; configuring a VSD encompassing: setting rated motor voltage and current, digital and analogue inputs, speed range and ramp times
  • testing procedures
  • relevant job safety assessments or risk mitigation processes
  • relevant manufacturer specifications
  • relevant problem-solving techniques
  • relevant WHS/OHS legislated requirements
  • relevant workplace documentation
  • relevant workplace policies and procedures

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing UEEIC0025

What does an assessment tool for UEEIC0025 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEEIC0025 needs to address all 37 unit components: 3 elements with 16 performance criteria, 11 performance evidence requirements, 10 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEEIC0025?

Auditori pulls the current release of UEEIC0025 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEEIC0025 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEEIC0025 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEEIC0025, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your UEEIC0025 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate UEEIC0025 free