UEEIC0020 — Fault find and repair analogue circuits and components in electronic control systems

1 Prepare to fault find analogue circuits

• 1.1WHS/OHS requirements and workplace procedures are identified and applied
• 1.2Hazards are identified, risks assessed and control measures implemented
• 1.3Safety hazards not previously identified are reported on job safety assessment and advice on risk control measures is sought from relevant person/s
• 1.4Extent of faults is determined from reports, other relevant documentation and discussions with relevant person/s
• 1.5Relevant person/s is consulted to ensure work is coordinated with others
• 1.6Tools, equipment and testing devices required to diagnose faults are obtained in accordance with workplace procedures and checked for correct operation and safety

2 Fault find and repair analogue circuits

• 2.1WHS/OHS risk control measures and procedures for carrying out the work are followed
• 2.2Need to test or measure live electrical components is determined in accordance with workplace procedures
• 2.3Circuits/machines/plant are checked and isolated in accordance with workplace procedures
• 2.4Logical diagnostic methods are applied to electronic control system apparatus faults by employing measurements and estimations of system operating parameters
• 2.5Scenarios are tested as suspected cause of system faults
• 2.6Fault causes are identified and relevant person/s engaged where fault is outside scope of analogue circuits and components
• 2.7Faults in electronic components of control system are rectified
• 2.8System is tested and verified as operating to specified job requirements
• 2.9Unplanned situations are responded to in accordance with workplace procedures in a manner that minimises risk to personnel and equipment
• 2.10Methods for dealing with unexpected situations are selected based on safety and specified work outcomes
• 2.11Diagnosis and rectification work activities are performed using sustainable energy principles and practices without waste of materials, damaging apparatus, the surrounding environment or services

3 Complete and report fault-find and repair activities

• 3.1WHS/OHS work completion risk control measures and procedures are followed
• 3.2Work site is made safe in accordance with workplace safety procedures
• 3.3Rectification of faults is documented in accordance with workplace procedures
• 3.4Relevant person/s is notified of system fault rectification in accordance with workplace procedures

What does an assessment tool for UEEIC0020 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEEIC0020 needs to address all 105 unit components: 3 elements with 21 performance criteria, 15 performance evidence requirements, 69 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEEIC0020?

Auditori pulls the current release of UEEIC0020 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEEIC0020 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEEIC0020 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEEIC0020, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.