UEEHA0033 — Supervise repair and overhaul of explosion-protected equipment type intrinsically safe (Ex i)

1 Prepare for repair and overhaul of equipment

• 1.1Repair facility quality assurance system is obtained, interpreted and applied
• 1.2Instructions on repair and/or overhaul are received and expected outcomes of the work confirmed with the user
• 1.3All documentation relevant to the equipment repair and/or overhaul is obtained, interpreted and applied
• 1.4Where adequate relevant equipment information is not available, steps taken to source such information are documented
• 1.5Agreement is made with the user for the repair and/or overhaul of Group II and III equipment to be completed in accordance with standards where adequate documentation is not available
• 1.6The common requirements for equipment repair and overhaul are ascertained from relevant standards and regulations and applied to the preparation for the work only where this arrangement is permitted

2 Establish the level of repair/ overhaul required

• 2.1Safe work methods are applied to measurements, tests and inspections carried out on the equipment to establish the extent of repair and/or overhaul
• 2.2The requirements, evaluation procedures and parameters of the type of equipment to be repaired and/or overhauled are ascertained from relevant standards and regulations and applied to establishing the extent of the work
• 2.3Measurement devices and instruments are maintained and calibrated in accordance with recognised practices
• 2.4The extent of work to be completed is established from measurements, tolerances and evaluation procedures and their correspondence with equipment documentation and the requirements of standards
• 2.5Specifications and instructions for the repair and/or overhaul work are documented ensuring compliance with original documentation, standards and user instructions

3 Arrange repair and overhaul work

• 3.1Arrangements are made for the repair and overhaul work to be completed in accordance with the specification and instructions, by an operative with the competencies specified in standards
• 3.2A copy of repair and/or overhaul specifications and instructions is provided to the operative responsible for completing the work

4 Verify that equipment complies with original certification

• 4.1Scope and level of testing and measurements required to verify that overhauled and/or repaired equipment complies with original certification is determined in accordance with manufacturers’ documentation and standards requirements as applicable to an equipment group
• 4.2Verification tests and measurements are arranged, conducted and documented in accordance with equipment type standards and instruction manuals
• 4.3Results of verification tests and measurements are reviewed to ascertain whether they comply with original equipment documentation and/or agreement with the user
• 4.4Actions are taken to rectify any non-compliance identified through the verification tests and measurements

5 Document repair and overhaul work

• 5.1Equipment is marked to show it has been repaired and/or overhauled in accordance with standards and applicable to an equipment group
• 5.2Job report of the completed repair and/or overhaul is prepared in accordance with standards and submitted to the user for inclusion in their verification dossier
• 5.3Repair facility records are updated to include the job record in accordance with standards and quality system
• 5.4The steps taken to obtain the certificate documents where adequate equipment documentation was not available is included in the repair facility records

What does an assessment tool for UEEHA0033 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEEHA0033 needs to address all 33 unit components: 5 elements with 21 performance criteria, 5 performance evidence requirements, 7 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEEHA0033?

Auditori pulls the current release of UEEHA0033 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEEHA0033 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEEHA0033 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEEHA0033, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.