UEEDV0006 — Install and modify optical fibre performance data communication cabling

1 Prepare to install and modify optical fibre cabling

• 1.1Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are identified, obtained and applied
• 1.2Installation and modification of wiring is prepared in consultation with others and sequenced appropriately
• 1.3Scope of work is determined from documentation and/or discussions with relevant person/s
• 1.4Advice is sought from relevant person/s to ensure work is coordinated effectively with others
• 1.5Material required for the installation work is obtained in accordance with workplace procedures and job requirements
• 1.6Tools, equipment and testing devices required for the installation work are obtained in accordance with workplace procedures and checked for correct operation and safety
• 1.7Preparatory work is checked to ensure no damage has occurred and is in accordance with workplace procedures and relevant industry standards

2 Install and modify optical fibre cables

• 2.1WHS/OHS risk control measures and workplace procedures for carrying out work are followed
• 2.2Optical fibres are tested for optical continuity
• 2.3Cables are installed and modified with sufficient excess to affect terminations in accordance with manufacturer specifications, relevant industry standards and job requirements
• 2.4Methods for dealing with unplanned situations are discussed with relevant person/s for approval and documented in accordance with workplace procedures
• 2.5Unplanned situations are dealt with safely and with the approval of relevant person/s
• 2.6Quality checks of the installed wiring are conducted in accordance with workplace procedures
• 2.7Cable installation and modification is conducted without waste of materials, damage to apparatus, circuits or surrounding environment using sustainable energy practices

3 Terminate optical fibre cables

• 3.1WHS/OHS risk control measures and workplace procedures for carrying out the work are followed
• 3.2Cable termination work area and optical fibre cables are cleaned and safety measures implemented in accordance with WHS/OHS requirements and workplace procedures
• 3.3Cables are prepared for termination in accordance with manufacturer specifications and relevant industry standards
• 3.4Optical fibre connectors are fitted in accordance with manufacturer specifications and relevant industry standards
• 3.5Relevant methods are used to splice optical fibre cables in accordance with WHS/OHS requirements, manufacturer specifications and relevant industry standards
• 3.6Cable performance tests are conducted and results documented
• 3.7Causes of defects indicated by test results are identified and rectified
• 3.8Unplanned situations are dealt with safely and with the approval of relevant person/s
• 3.9Quality checks of the installed wiring are conducted in accordance with workplace procedures
• 3.10Cable terminations are completed without waste of materials, damage to apparatus, circuits or surrounding environment using sustainable energy practices

4 Document installation and modification and verify optical fibre cabling performance

• 4.1WHS/OHS work completion risk control measures and workplace procedures are followed
• 4.2Worksite is cleaned and made safe in accordance with workplace procedures
• 4.3Final checks to the installed cabling are conducted in accordance with job requirements
• 4.4Documentation certifying system performance is issued to a relevant person/s

What does an assessment tool for UEEDV0006 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEEDV0006 needs to address all 62 unit components: 4 elements with 28 performance criteria, 15 performance evidence requirements, 19 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEEDV0006?

Auditori pulls the current release of UEEDV0006 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEEDV0006 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEEDV0006 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEEDV0006, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.