TLIF0078Recognise motor vehicle road crash risks and post-crash actions

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Every new account includes a free credit — no card, no subscription.

What an assessment for TLIF0078 must cover

18 assessable components: 3 elements (7 performance criteria), 6 performance evidence and 5 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Identify types of motor vehicle crashes

  • 1.1Common types of motor vehicle crashes are identified and outlined
  • 1.2Possible risk factors that contribute to motor vehicle crashes are identified

2 Identify risks and causes of motor vehicle crashes

  • 2.1Common causes of motor vehicle crashes are explained
  • 2.2Human, environmental and vehicular factors that contribute to motor vehicle crashes are identified and outlined
  • 2.3Measures to prevent the most common road crashes are identified

3 Identify actions to be taken post-crash by drivers and others

  • 3.1Legal obligations of drivers and others after a motor vehicle crash are explained
  • 3.2Practical strategies that can be applied to a crash scene to decrease further risk are identified

Performance evidence

  • explaining common causes of major road crashes
  • explaining factors that contribute to motor vehicle crashes
  • explaining legal obligations of a driver and others post-crash
  • explaining the common types of major road crashes
  • identifying risk management strategies at a crash scene
  • reading, interpreting and following instructions, procedures and information

Knowledge evidence

  • human, environmental and vehicular factors including: human: fatigue drugs alcohol speed inattention distraction environmental: road surface (gravel/sealed) animals road debris geographical obstacle architectural obstacle vehicular factors: mechanical failure vehicle defects – tyres and brakes
  • relevant regulations and rules
  • relevant risk factors and how they affect motor vehicle performance
  • types of common motor vehicle crashes including: rear end collision side impact collision/adjacent direction collision right turn in front of oncoming traffic run off road on straight collision run off road on curve collision head-on collision pedestrian collision
  • types of common motor vehicle crashes and their potential causes including: rear end collision: travelling too fast not leaving enough distance between vehicles side impact collision/adjacent direction collision: poor or insufficient scanning of driving environment not sufficiently judging gap in traffic overconfidence in driving ability head on collision: not judging speed or distance correctly when overtaking not detecting hazards early enough impatience run off road on straight collision: travelling too fast for conditions inexperience resulting in over steering or misjudging distances pedestrian collision: pedestrians not judging amount of time it takes a vehicle to stop encountering intoxicated or unpredictable pedestrians right turn in front of oncoming traffic: not judging speed accurately.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing TLIF0078

What does an assessment tool for TLIF0078 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for TLIF0078 needs to address all 18 unit components: 3 elements with 7 performance criteria, 6 performance evidence requirements, 5 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for TLIF0078?

Auditori pulls the current release of TLIF0078 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for TLIF0078 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing TLIF0078 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of TLIF0078, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your TLIF0078 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate TLIF0078 free