TLIC3082 — Operate a locomotive by portable remote control

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate TLIC3082 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for TLIC3082 must cover

27 assessable components: 3 elements (13 performance criteria), 9 performance evidence and 5 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Set up locomotive for portable remote operation

1.1Locomotive is set up for portable remote control operation in accordance with manufacturer instructions and/or workplace procedures
1.2Portable remote control equipment is installed, as required, in accordance with manufacturer instructions and/or workplace procedures
1.3Hazards are identified, risks are assessed and risk control measures implemented
1.4Remote control system is tested and operation confirmed in accordance with manufacturer instructions and/or workplace procedures
1.5Relevant work health and safety (WHS)/occupational health and safety (OHS) requirements are followed to prevent injury and damage to equipment

2 Operate locomotive using portable remote control equipment

2.1Warning signage is placed, as required, in accordance with workplace procedures
2.2Portable remote control equipment is operated and monitored in accordance with operational requirements during train movements to provide safe train handling and control within defined limits
2.3Portable remote control equipment is operated with an awareness that not all people in work area vicinity may know locomotive is being operated remotely
2.4Operational difficulties encountered are addressed by re-establishing control of locomotive with minimum risk to personnel and equipment

3 Shut down portable remote control equipment

3.1Locomotive is secured against unintentional movement in a safe location in accordance with workplace procedures
3.2Portable remote control equipment is shut down in accordance with manufacturer instructions and/or workplace policies and procedures
3.3Portable remote control equipment is removed from locomotive, as required, in accordance with manufacturer instructions and/or workplace policies and procedures
3.4Relevant WHS/OHS requirements are followed to prevent injury and damage to equipment

Performance evidence

identifying job hazards and taking required actions to minimise, control or eliminate identified hazards
interpreting and following operational instructions and prioritising work
modifying activities depending on operational contingencies, risk situations and environments
operating and adapting to differences in equipment in accordance with operating procedures
reading, interpreting and following relevant instructions, workplace procedures and information
reporting and/or rectifying identified problems, faults or malfunctions promptly in accordance with regulatory requirements and workplace procedures
selecting and using required personal protective equipment (PPE) conforming to industry and work health and safety (WHS)/occupational health and safety (OHS) standards
setting up portable remote control equipment in accordance with workplace procedures
working systematically with required attention to detail without injury to self or others, or damage to goods or equipment

Knowledge evidence

defined limits
locomotive operating techniques
rail danger zones
rail safety, WHS/OHS and environmental procedures and regulations
workplace operational instructions and procedures for: braking and safety system workplace procedures, identifying defects in portable remote control units and assessing appropriate actions to be taken, managing hazardous situations involving portable remote control systems, operating portable remote control equipment, shunting and marshalling procedures

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing TLIC3082

What does an assessment tool for TLIC3082 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for TLIC3082 needs to address all 27 unit components: 3 elements with 13 performance criteria, 9 performance evidence requirements, 5 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for TLIC3082?

Auditori pulls the current release of TLIC3082 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for TLIC3082 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing TLIC3082 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of TLIC3082, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your TLIC3082 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate TLIC3082 free