TLIC0007 — Assist to stable a train

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate TLIC0007 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for TLIC0007 must cover

41 assessable components: 3 elements (16 performance criteria), 11 performance evidence and 14 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine stabling location

1.1Contact is made with appropriate personnel to determine planned location for stabling a train
1.2Location is identified and confirmed with relevant personnel
1.3Directions from relevant personnel are followed

2 Stable train

2.1Train is shunted and secured to prevent roll away as agreed with relevant personnel
2.2Rolling stock is stabled as directed
2.3Rolling stock is secured to prevent roll away in accordance with directions and workplace procedures
2.4Train motive power unit shutdown is confirmed in accordance with workplace procedures
2.5Cab is secured in accordance with workplace procedures
2.6Derailers are set in place in accordance with workplace procedures as required

3 Assist with post-operational checks

3.1Fuel and fluid levels are checked and required action is taken to replenish consumables
3.2Rolling stock inspection is undertaken as agreed with relevant personnel
3.3Identified faults and defects are fixed and/or reported and recorded in accordance with workplace procedures
3.4Faulty or defective equipment is isolated and tagged in accordance with workplace procedures
3.5Post-operational checks are confirmed and agreed with relevant personnel
3.6Equipment is returned and stowed in accordance with workplace requirements
3.7Post-operational documentation checks are completed in accordance with workplace procedures

Performance evidence

adapting to differences in trains and associated equipment and procedures
carrying out post-operational checks on a range of trains in accordance with workplace procedures
communicating effectively with others
conducting a visual inspection of a train
documenting outcomes of train inspection
identifying and assessing rolling stock defects and deficiencies and taking appropriate action to report, isolate, repair or replace identified defective equipment in accordance with workplace procedures
identifying job hazards and taking required action to minimise, control or eliminate identified hazards
interpreting and following operational instructions and prioritising work
modifying activities depending on operational contingencies, risk situations and environments
reading and interpreting relevant instructions, procedures and information
recognising problems that may arise when stabling a train and taking appropriate action.

Knowledge evidence

applicable state/territory legislated rail safety requirements, relevant codes of practice and/or guidelines
braking and safety system procedures
emergency response procedures
relevant safety, work health and safety (WHS)/occupational health and safety (OHS), and environmental procedures and regulations
speed and load limit compliance requirements
typical defects that can occur on a train and related action that should be taken
workplace procedures and train operating requirements including:
completing relevant documentation when stabling a train
identifying equipment defects and assessing for appropriate action
managing hazardous situations when stabling a train
minor maintenance, cleaning, lubricating and servicing a train
required protocol for operating electronic communications equipment
securing a train to prevent roll away
stabling a train

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing TLIC0007

What does an assessment tool for TLIC0007 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for TLIC0007 needs to address all 41 unit components: 3 elements with 16 performance criteria, 11 performance evidence requirements, 14 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for TLIC0007?

Auditori pulls the current release of TLIC0007 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for TLIC0007 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing TLIC0007 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of TLIC0007, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your TLIC0007 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate TLIC0007 free