MEM27032 — Service combustion engines

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MEM27032 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MEM27032 must cover

40 assessable components: 3 elements (15 performance criteria), 9 performance evidence and 16 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine job requirements

1.1Follow standard operating procedures (SOPs)
1.2Comply with work health and safety (WHS) requirements at all times
1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
1.4Identify job requirements from specifications, job sheets or work instructions

2 Check and assess items for serviceability

2.1Assess engine consumable fluids and components for correct condition
2.2Identify replacement fluids/items using manufacturers’ data
2.3Identify abnormal appearance/condition of engine consumables fluids and components and report to appropriate authority
2.4Apply lubricant, cooling system additives and filtering principles in checking and assessing items for serviceability

3 Perform servicing procedures

3.1Drain, flush and replace engine fluids with correct fluid and/or additives to the correct level/concentration according to manufacturer recommendations
3.2Remove engine consumable components and replace according to manufacturer recommended procedures
3.3Ensure engine is free of lubricant, water and air leaks after servicing work
3.4Secure hoses, wiring and ducts and keep clear of moving parts after servicing work, where required
3.5Make minor running adjustments to specification
3.6Obtain test samples of fluids from system as determined by SOPs
3.7Record servicing activities on report sheet/proforma, or provide accurate oral report

Performance evidence

following work instructions, standard operating procedures (SOPs) and safe work practices
assessing engine consumable fluids and components for levels and serviceability and identifying replacement consumables and components using manufacturers’ data
identifying and reporting on fluids and items which have abnormal appearance and flushing and cleaning engine of any residual fluids according to procedures
undertaking numerical operations and calculations for servicing combustion engines
removing/replacing engine fluids with correct fluids and/or additives to correct levels
checking engine for leaks after servicing and, where required, securing all wiring, hoses and ducts free of moving parts
carrying out minor running adjustments
obtaining test samples of fluids for further testing
recording and reporting service activities in accordance with SOPs

Knowledge evidence

safe work practices and procedures and use of personal protective equipment (PPE)
common defects that can be identified from the appearance of fluids and items
procedures for:
reporting items/fluids with abnormal appearance
draining and flushing fluids from the engine, including the reasons for ensuring any residual/spilt fluids are removed from the engine
removing/replacing engine consumable fluids and components
checking serviced engines for leaks
taking test samples
reporting service activities
principles of operation of the lubrication and cooling systems
function of filters
purpose of a range of additives and correct proportions to be used
spilt containment and spilt kits
appropriate grade and type of replacement fluid
methods of fastening/securing wires, hoses and ducts
specifications and procedures for undertaking minor running adjustments

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MEM27032

What does an assessment tool for MEM27032 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM27032 needs to address all 40 unit components: 3 elements with 15 performance criteria, 9 performance evidence requirements, 16 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEM27032?

Auditori pulls the current release of MEM27032 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM27032 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEM27032 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM27032, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MEM27032 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MEM27032 free