MEM25004 — Fair and shape surfaces
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for MEM25004 must cover
27 assessable components: 3 elements (11 performance criteria), 7 performance evidence and 9 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Determine job requirements
- 1.1Follow standard operating procedures (SOPs)
- 1.2Comply with work health and safety (WHS) requirements at all times
- 1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
- 1.4Identify job requirements from specifications, job sheets or work instructions and determine sequence of operations
2 Prepare for filling/sanding/grinding operations
- 2.1Set up safety equipment in accordance with procedures
- 2.2Select appropriate fillers and abrasive materials and prepare to suit job requirements and required surface finish
- 2.3Select appropriate equipment and accessories and set up ready for operation
3 Perform filling, sanding, fairing and grinding operations
- 3.1Carry out work to specified finishes using appropriate tools and techniques
- 3.2Use power tools to optimise equipment and material use
- 3.3Check surfaces to ensure compliance to specifications
- 3.4Make adjustments and corrections as required
Performance evidence
- following work instructions, standard operating procedures (SOPs) and safe work practices
- identifying and selecting materials to be prepared
- setting up safety equipment, including fans and extraction unit, in accordance with procedures
- selecting and preparing appropriate fillers and abrasive materials for required surface finish
- setting up and using a selection of hand and power tools using associated safety accessories, including dust extraction assemblies and guard protection
- surface filling and internal and external sanding to achieve flat, concave and convex surfaces
- checking surfaces to ensure compliance visually and by the use of fairing battens, straightedges, stringlines, french curves and templates.
Knowledge evidence
- safe work practices and procedures and use of personal protective equipment (PPE)
- filling and fairing specifications
- types, properties and characteristics of fillers and materials to be prepared and features/specific preparation requirements
- filler ingredient measuring and preparation techniques
- relevant safety equipment and uses/application
- filling, fairing and shaping techniques
- equipment and accessories and applications
- means of optimising life of abrasive materials and reducing waste
- compliance testing procedures.
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing MEM25004
What does an assessment tool for MEM25004 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM25004 needs to address all 27 unit components: 3 elements with 11 performance criteria, 7 performance evidence requirements, 9 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for MEM25004?
Auditori pulls the current release of MEM25004 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM25004 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing MEM25004 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM25004, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
- MEM03001 — Perform manual production assembly
- MEM03002 — Perform precision assembly
- MEM03003 — Perform sheet and plate assembly
- MEM03004 — Perform electronic/electrical assembly (production)
- MEM03005 — Rework and repair (electrical/electronic production)
- MEM03006 — Set assembly stations
- MEM04001 — Operate melting furnaces
- MEM04002 — Perform gravity die casting
- MEM04003 — Operate pressure die casting machine
- MEM04004 — Prepare and mix sand for metal moulding
- MEM04006 — Operate sand moulding and core making machines
- MEM04007 — Pour molten metal
Your MEM25004 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate MEM25004 free