MEM18064 — Maintain instrumentation system components

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MEM18064 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MEM18064 must cover

32 assessable components: 3 elements (14 performance criteria), 8 performance evidence and 10 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine job requirements

1.1Follow standard operating procedures (SOPs)
1.2Comply with work health and safety (WHS) requirements at all times
1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
1.4Identify job requirements from specifications, drawings, job sheets or work instructions

2 Check instrumentation system components

2.1Identify system components through interpreting the characteristics and operational function of each system component
2.2Inspect the operational function of each component and test in accordance with procedures
2.3Assess operation of each component against specifications

3 Identify, repair/replace faulty instrumentation system components

3.1Localise/isolate faulty system components and confirm the malfunction by inspection and testing using appropriate techniques, procedures and safety requirements
3.2Dismantle faulty system components and repair according to manufacturers’/site specifications
3.3Select replacement parts from manufacturer catalogues and listings to required specifications
3.4Reassemble system components and test for correct operation and assessment against specifications
3.5Confirm correct operation of the instrumentation system according to SOPs
3.6Adopt appropriate follow-up procedures
3.7Complete service reports in accordance with SOPs

Performance evidence

following work instructions, standard operating procedures (SOPs) and safe work practices
identifying and interpreting instrumentation circuits, specifications, drawings, data sheets and manuals and obtaining relevant data with respect to the operation of the instrumentation systems/equipment
locating, inspecting and testing a range of instrumentation system components using appropriate test equipment, techniques and procedures
fault finding components and confirming malfunction by inspection and testing using instrumentation principles and procedures
dismantling/repairing/reassembling faulty components and sourcing replacement parts from manufacturer/supplier catalogues
checking repaired/replaced instrumentation system components for correct operation and completing all service reports in accordance with SOPs
undertaking zero, span and range checks and calibrating instrumentation systems/equipment to operational specifications
recording/documenting test results in accordance with SOPs

Knowledge evidence

safe work practices and procedures and use of personal protective equipment (PPE)
instrumentation principles, including controlling density, level, flow, temperature and composition of a range of materials
effects of resistance, capacitance, inductance and impedance (R, L, C) upon electrical circuit
interpretation requirements of schematic, wiring and block diagrams and circuits
basic principles of hydraulic/pneumatic/electrical flow
procedures for: inspecting and testing instrumentation system components and equipment to be used
dismantling, repairing, reassembling and testing faulty instrumentation system components
recording and completing service reports
purpose, operational function and specifications, including deviations of instrumentation system components
correct operation of the instrumentation system

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MEM18064

What does an assessment tool for MEM18064 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM18064 needs to address all 32 unit components: 3 elements with 14 performance criteria, 8 performance evidence requirements, 10 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEM18064?

Auditori pulls the current release of MEM18064 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM18064 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEM18064 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM18064, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MEM18064 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MEM18064 free