MEM18055 — Dismantle, replace and assemble engineering components

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MEM18055 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MEM18055 must cover

29 assessable components: 4 elements (14 performance criteria), 8 performance evidence and 7 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine job requirements

1.1Follow standard operating procedures (SOPs)
1.2Comply with work health and safety (WHS) requirements at all times
1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
1.4Identify job requirements from specifications, drawings, job sheets or work instructions

2 Dismantle engineering components

2.1Inspect engineering components and analyse task requirements
2.2Dismantle components using appropriate tools and techniques
2.3Mark components for identification, where required

3 Identify faulty components and select replacement parts

3.1Obtain and interpret specifications for components from appropriate source
3.2Identify out-of-specification, damaged or faulty components
3.3Identify faulty components for repair, replacement or adjustment
3.4Select replacement and/or repaired parts for reassembly

4 Assemble engineering components into assemblies or sub-assemblies

4.1Prepare, assemble and adjust components using fastening equipment and methods using appropriate tools, equipment and techniques which ensures compliance to specifications
4.2Select and apply lubrication, packing and sealing materials
4.3Inspect, test and adjust final component assembly, as necessary, for compliance with operational specifications and return to use according to SOPs

Performance evidence

following work instructions, standard operating procedures (SOPs) and safe work practices
identifying and interpreting specifications, charts, lists, drawings and other applicable reference documents to dismantle, replace and assemble engineering components
dismantling components using appropriate techniques, tools and equipment and marking component parts for reassembly purposes
checking component parts visually and dimensionally for compliance to specification and marking faulty parts for repair, replacement or adjustment
selecting replacement parts using manufacturers’ catalogues and data
assembling components using appropriate techniques and principles
inspecting final assembly for compliance to specifications
returning the final assembly to service in accordance with SOPs

Knowledge evidence

safe work practices and procedures and use of personal protective equipment (PPE)
tasks to be performed in accordance with SOPs
tools and equipment associated with dismantling the components
procedures for: - checking components for conformance to specification and equipment required - assembling components and requirements of the assembly in terms of specifications, operational performance, quality and safety - lubricating the assembly - returning components/assemblies into use and checks to be undertaken during inspection of the final assembly
specifications of the components to be replaced, including features and/or dimensions
process of identifying replacement parts from catalogues
packing and sealing materials

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MEM18055

What does an assessment tool for MEM18055 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM18055 needs to address all 29 unit components: 4 elements with 14 performance criteria, 8 performance evidence requirements, 7 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEM18055?

Auditori pulls the current release of MEM18055 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM18055 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEM18055 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM18055, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MEM18055 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MEM18055 free