MEM15020 — Perform inspection of measuring instruments

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MEM15020 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MEM15020 must cover

32 assessable components: 3 elements (12 performance criteria), 7 performance evidence and 13 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine job requirements

1.1Follow standard operating procedures (SOPs)
1.2Comply with work health and safety (WHS) requirements at all times
1.3Determine type and function of measuring instrument
1.4Determine if a verification, certification or in-service tolerance is to be applied for inspection of the instrument
1.5Identify appropriate tolerances for the determined inspection

2 Perform inspection of measuring instruments to determine compliance

2.1Determine the impact of the operating environment on the instrument
2.2Identify sources of any possible operational error in the use of measuring instruments
2.3Select and use specialised equipment for the inspection
2.4Inspect measuring instruments in accordance with appropriate test procedures, legislation, policies and WHS considerations

3 Finalise inspection and take appropriate action

3.1Determine and implement the appropriate action to be undertaken as a result of the inspection
3.2Monitor, identify and report performance trends of particular models of measuring instruments
3.3Record the information in the organisation’s information system

Performance evidence

following work instructions, standard operating procedures (SOPs) and safe work practices
examining instruments for existing verification/certification marks and determining the type of inspection required on at least two occasions
selecting and using specialised test equipment on at least two occasions
conducting inspection of measuring equipment on at least two occasions in accordance with test procedures, legislation and policies
implementing work health and safety (WHS) considerations when carrying out inspection
preparing technical reports relating to verification/certification or in-service inspection
completing inspection documentation in accordance with procedures

Knowledge evidence

safe work practices and procedures
reference materials
fundamental operating features and functions for different types of measuring instruments and the purpose of major components
differences in the application of tolerances being applied
the processes variations required between the verification/certification and in-service of a range of measuring instruments
process variations between verification/certification and in-service inspection
appropriate tolerances for a range of measuring instruments
environmental factors that may not result in an instrument rejection but other remedial actions
specialised equipment that can be required
legislation and policies associated with conducting inspection of measuring instruments
action to be taken where a conflict occurs between uniform test procedures and those test procedures contained in certificates of approval
situations where the removal of verification/certification marks is impractical on some instruments and the appropriate action to be taken in these circumstances
methods to monitor performance trends.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MEM15020

What does an assessment tool for MEM15020 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM15020 needs to address all 32 unit components: 3 elements with 12 performance criteria, 7 performance evidence requirements, 13 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEM15020?

Auditori pulls the current release of MEM15020 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM15020 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEM15020 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM15020, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MEM15020 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MEM15020 free