MEM15010 — Perform laboratory procedures

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MEM15010 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MEM15010 must cover

33 assessable components: 2 elements (10 performance criteria), 7 performance evidence and 16 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine job requirements

1.1Follow standard operating procedures (SOPs)
1.2Comply with work health and safety (WHS) requirements at all times
1.3Identify job requirements from specifications, drawings, circuits, job sheets or work instructions

2 Work under laboratory conditions and perform calibration

2.1Conduct independent tests under controlled conditions
2.2Verify and calibrate equipment to agreed quality standards
2.3Safeguard calibration status against unauthorised adjustment
2.4Keep accurate records for reference purposes
2.5Recall test equipment periodically for adjustment, repair and re-calibration
2.6Maintain documentary evidence to satisfy the requirements of the certifying body or as specified by the calibration standards or the manufacturer’s recommendations
2.7Trace calibration of known accuracy to national or international reference standards or, where these do not exist, set calibration to specifically developed criteria

Performance evidence

following work instructions, standard operating procedures (SOPs) and safe work practices
identifying and interpreting relevant drawings, circuits, specifications, instructions and data
conducting independent tests to a standard method under controlled conditions
checking measuring equipment for correct calibration against agreed quality standards
safeguarding the calibration status of the equipment against unauthorised adjustment
recalling test equipment for adjustment, repair and re-calibration and using reference standards or specific criteria as a basis for calibration
completing and maintaining records of measuring equipment calibrated and preparing reports on the tests carried out.

Knowledge evidence

safe work practices and procedures
tests and conditions under which they are to be undertaken
testing procedures to be followed and the reasons for conducting tests under controlled conditions and the need for tests to be conducted independently
quality standards against which the measuring equipment is to be calibrated
specifications and correct operation of the measuring equipment
tools and equipment required to check the calibration of the measuring equipment
procedures for checking the calibration of the measuring equipment
any codes, standards, legislative or regulatory requirements applicable to the measuring equipment and/or calibration
procedures for preventing unauthorised adjustment of equipment and the reasons for protecting equipment against unauthorised adjustment
records to be kept with respect to the calibration of measuring equipment and the reasons for keeping accurate calibration records
procedures for recalling test equipment for adjustment, repair and re-calibration and the frequency of test equipment recall and reasons why test equipment can be recalled
all relevant documentation relating to the calibration/re-calibration of test equipment and procedures for completion
sources of reference standards and procedures to be used in the absence of reference standards
reports to be prepared/provided with respect to the test equipment being tested and the procedures for preparing/ providing reports on tests carried out on test equipment
auditing processes to be applied to testing procedures
use of information from the inspections, tests and audits conducted in the development of design and servicing of products/equipment.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MEM15010

What does an assessment tool for MEM15010 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM15010 needs to address all 33 unit components: 2 elements with 10 performance criteria, 7 performance evidence requirements, 16 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEM15010?

Auditori pulls the current release of MEM15010 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM15010 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEM15010 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM15010, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MEM15010 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MEM15010 free