Auditori
Get started

MEM09003 — Prepare basic engineering drawing

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MEM09003 freeSee a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MEM09003 must cover

32 assessable components: 4 elements (13 performance criteria), 9 performance evidence and 10 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine job requirements

  • 1.1Follow standard operating procedures (SOPs)
  • 1.2Comply with work health and safety (WHS) requirements at all times
  • 1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4Identify job requirements and purpose of drawing from specifications, associated documents or work instructions
  • 1.5Identify and collect all data necessary to produce the drawing
  • 1.6Confirm drawing requirements and method with relevant personnel and establish timeframes for completion

2 Prepare or make changes to engineering drawing

  • 2.1Select drafting equipment appropriate to the drawing method chosen
  • 2.2Apply drafting principles to produce a drawing that is consistent with SOPs, in consultation with supervisor, as required
  • 2.3Ensure completed drawing is approved in accordance with SOPs

3 Prepare engineering parts list

  • 3.1Identify components parts and organise by component type in accordance with SOPs and customer requirements

4 Issue drawing

  • 4.1Complete drawings and parts lists records in accordance with SOPs
  • 4.2Copy approved drawings and parts lists and issue to relevant personnel
  • 4.3Store approved drawings and parts lists, and catalogue in accordance with SOPs

Performance evidence

  • following work instructions, standard operating procedures (SOPs) and safe work practices
  • identifying and confirming drawing requirements and purpose through consultation with relevant personnel, and establishing timeframes for completion
  • setting up and using drafting equipment
  • applying drafting principles in accordance with AS 1100.101-1992 (R2014) Technical drawing – General principles or equivalent
  • resolving any issues in the preparation of engineering drawing in consultation with a supervisor
  • undertaking numerical operations, geometry and calculations and formulae associated with preparing basic engineering drawings
  • compiling an engineering parts list by component type
  • issuing completed drawing and parts list to relevant personnel
  • storing and cataloguing approved drawing and parts list in accordance with SOPs.

Knowledge evidence

  • safe work practices and procedures
  • requirements and purpose of drawing and engineering parts list to be produced
  • sources and standards of relevant data and information to which drawing is to be produced
  • person(s) who can confirm drawing requirements and timeframe for completion
  • method of drawing preparation and reasons for selecting the chosen drawing method
  • procedures for: • producing an initial drawing • changing an existing drawing • checking and approving drawings and persons responsible • copying, issuing and recording approved drawings and or parts lists
  • safe handling and storage and filing of drawings and/or parts lists and consequences of using inappropriate techniques
  • drafting principles to be applied to the production and changing of a drawing
  • consequences of inappropriate and incomplete components parts lists
  • personnel to whom copies of approved drawings and or parts lists can be issued.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MEM09003

What does an assessment tool for MEM09003 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM09003 needs to address all 32 unit components: 4 elements with 13 performance criteria, 9 performance evidence requirements, 10 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEM09003?

Auditori pulls the current release of MEM09003 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM09003 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEM09003 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM09003, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MEM09003 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MEM09003 free