MEM08006 — Produce clear and/or coloured and/or sealed anodised films on aluminium
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for MEM08006 must cover
25 assessable components: 4 elements (11 performance criteria), 5 performance evidence and 9 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Determine job requirements
- 1.1Follow standard operating procedures (SOPs)
- 1.2Comply with work health and safety (WHS) requirements at all times
- 1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
- 1.4Identify job requirements from specifications, job sheets or work instructions
2 Prepare for anodising
- 2.1Apply taping and waxing masking techniques, where required
- 2.2Minimise contact marks and shielding
3 Assess preparation of work for correct jigging/loading
- 3.1Connect work correctly for the required current flow with minimum contact marks and shielding
- 3.2Reject all incorrectly loaded work
4 Anodise work
- 4.1Carry out anodising treatment steps following SOPs
- 4.2Carry out sealing or dyeing and sealing steps following SOPs
- 4.3Maintain process parameters within specified limits
Performance evidence
- following work instructions, standard operating procedures (SOPs) and safe work practices
- preparing aluminium and aluminium alloy work pieces for anodising, including masking up
- loading work and carrying out pre-treatment steps, including connecting the work to the required electrical current
- producing clear and coloured and sealed anodised films on aluminium and its alloys by maintaining process parameters
- sealing and dying anodised work to specifications.
Knowledge evidence
- safe work practices and procedures and use of personal protective equipment (PPE)
- process for anodising aluminium
- materials, techniques and procedures for masking materials during anodising
- causes of contact marks and shielding during the anodising process and procedures for minimising contact marks and shielding
- procedures for connecting the work to the electrical current and the electrical current required for the anodising process
- methods for correctly loading work and recognising incorrectly loaded work
- reasons for rejecting incorrectly loaded work
- steps to be carried out in the seal/dye and seal process
- procedures and reasons for monitoring and maintaining the process parameters within the specified limits.
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing MEM08006
What does an assessment tool for MEM08006 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM08006 needs to address all 25 unit components: 4 elements with 11 performance criteria, 5 performance evidence requirements, 9 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for MEM08006?
Auditori pulls the current release of MEM08006 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM08006 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing MEM08006 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM08006, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
- MEM03001 — Perform manual production assembly
- MEM03002 — Perform precision assembly
- MEM03003 — Perform sheet and plate assembly
- MEM03004 — Perform electronic/electrical assembly (production)
- MEM03005 — Rework and repair (electrical/electronic production)
- MEM03006 — Set assembly stations
- MEM04001 — Operate melting furnaces
- MEM04002 — Perform gravity die casting
- MEM04003 — Operate pressure die casting machine
- MEM04004 — Prepare and mix sand for metal moulding
- MEM04006 — Operate sand moulding and core making machines
- MEM04007 — Pour molten metal
Your MEM08006 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate MEM08006 free