MEM07015 — Set computer controlled machines and processes

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MEM07015 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MEM07015 must cover

40 assessable components: 4 elements (15 performance criteria), 11 performance evidence and 14 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine job requirements

1.1Follow standard operating procedures (SOPs)
1.2Comply with work health and safety (WHS) requirements at all times
1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
1.4Identify job requirements from specifications, drawings, job sheets or work instructions

2 Mount work holding fixtures/devices/tools

2.1Prepare machine to accept work holding fixtures/devices/ tools
2.2Mount pre-set tooling into machine/equipment, as required
2.3Set work holding fixtures/devices on machine
2.4Identify/verify tool offset or datum settings against job sheet
2.5Load and select program and verify in accordance with job instructions

3 Conduct pre-start checks

3.1Undertake pre-start checks
3.2Observe correct safety procedures and check safety equipment for correct operation

4 Set machine

4.1Set/adjust machine to meet operational requirements and specifications
4.2Check production samples for compliance with specifications
4.3Replace pre-set tools, adjust tool offsets or take other corrective action in accordance with SOPs, as required
4.4Instruct operator, if necessary, ensuring that all safety procedures and devices are in place

Performance evidence

following work instructions, standard operating procedures (SOPs) and safe work practices
identifying and interpreting specifications, charts, lists, drawings and other applicable reference documents with respect to setting computer controlled machines and processes
selecting appropriate tool and work piece holding fittings and fixtures
mounting pre-set tooling and verifying tool offsets and/or datum settings against job sheets or instructions
undertaking numerical operations and calculations in carrying out setting of machines and processes
loading and verifying programs
conducting pre-start checks, including checking safety features and safety equipment, for correct operation
setting and adjusting machine
measuring and verifying first-off samples for conformance with specifications
identifying worn or damaged tooling and taking appropriate corrective action
instructing machine operator on the sequence of operations

Knowledge evidence

safe work practices and procedures and use of personal protective equipment (PPE)
work holding fixtures/devices/tools and pre-set tooling for different machines and processes
procedures for mounting work holding fixtures/devices/tools
location of work holding fixtures/devices/tools relative to the machine datum or zero
reasons for establishing tool offsets
purpose of datum settings and sources of information on tool offsets and datum settings
procedures to locate, load and verify programs
pre-start checks, processes and procedures
purpose and function of machine safety features and/or safety equipment
machine/process, setting and operating procedures
adjustments that can be made to the machine/process and the effect of adjustments on machine and operational specifications
product or part specifications in relation to the machining process
measuring devices for checking parts or products
examples, effects and corrective action for worn or damaged tooling

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MEM07015

What does an assessment tool for MEM07015 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM07015 needs to address all 40 unit components: 4 elements with 15 performance criteria, 11 performance evidence requirements, 14 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEM07015?

Auditori pulls the current release of MEM07015 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM07015 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEM07015 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM07015, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MEM07015 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MEM07015 free