MEM07007 — Perform milling operations
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for MEM07007 must cover
31 assessable components: 4 elements (12 performance criteria), 8 performance evidence and 11 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Determine job requirements
- 1.1Follow standard operating procedures (SOPs)
- 1.2Comply with work health and safety (WHS) requirements at all times
- 1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
- 1.4Identify job requirements from specifications, drawings, job sheets or work instructions
2 Prepare to undertake work
- 2.1Determine sequence of operations to meet job specifications
- 2.2Select tooling, using International Standard Organisation (ISO) standards or according to SOPs, to produce component to specification
- 2.3Determine cutting parameters
3 Perform milling operations
- 3.1Carry out milling operations to produce components to specification
- 3.2Undertake operations using conventional and/or climb milling techniques and a variety of cutters
- 3.3Use the full range of standard accessories
4 Check components
- 4.1Check components for compliance with specifications
- 4.2Rectify non-compliant product in accordance with SOPs
Performance evidence
- following work instructions, standard operating procedures (SOPs) and safe work practices
- identifying and interpreting engineering drawings to AS 1100,401-1884 (R2014) Technical drawing to determine job requirements for milling operations, including quantity, material, measurements and tolerances
- selecting cutting tools using International Standard Organisation (ISO) standards or according to SOPs from drawings, sketches, specifications and instructions, as appropriate
- fixing of job and tooling to specifications
- calculating and setting required speeds and feeds
- undertaking milling operations to specifications
- checking components for conformance to specifications
- rectifying non-compliant product
Knowledge evidence
- safe work practices and procedures and use of personal protective equipment (PPE)
- sequence of milling operations to achieve the job requirements
- cutter types and tooling geometry
- consequences of varying speeds and feeds from the optimum rates calculated
- effects of different materials on cutting speeds and feeds
- conventional and climb milling techniques and their applications
- application of each of the following: - slab - gang - shell - slot - form and slitting
- use of dividing heads and rotary tables when milling components
- procedures for using dividing heads and rotary tables on milling machines
- appropriate techniques, tools and equipment to measure milled components
- tools, techniques and equipment for checking components for conformance to specifications and rectifying non-compliant components
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing MEM07007
What does an assessment tool for MEM07007 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM07007 needs to address all 31 unit components: 4 elements with 12 performance criteria, 8 performance evidence requirements, 11 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for MEM07007?
Auditori pulls the current release of MEM07007 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM07007 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing MEM07007 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM07007, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
- MEM03001 — Perform manual production assembly
- MEM03002 — Perform precision assembly
- MEM03003 — Perform sheet and plate assembly
- MEM03004 — Perform electronic/electrical assembly (production)
- MEM03005 — Rework and repair (electrical/electronic production)
- MEM03006 — Set assembly stations
- MEM04001 — Operate melting furnaces
- MEM04002 — Perform gravity die casting
- MEM04003 — Operate pressure die casting machine
- MEM04004 — Prepare and mix sand for metal moulding
- MEM04006 — Operate sand moulding and core making machines
- MEM04007 — Pour molten metal
Your MEM07007 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate MEM07007 free