MEM06010 — Perform hand forging
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for MEM06010 must cover
24 assessable components: 3 elements (11 performance criteria), 5 performance evidence and 8 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Determine job requirements
- 1.1Follow standard operating procedures (SOPs)
- 1.2Comply with work health and safety (WHS) requirements at all times
- 1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
- 1.4Identify job requirements from specifications, sketches, job sheets or work instructions
2 Apply hand forging techniques
- 2.1Select and use hand tools, hand forming tools, anvil tools, and floor tools for specific forging techniques
- 2.2Select and apply appropriate hand forging techniques to meet specifications
- 2.3Adhere to forging temperatures and heat specifications for various materials
- 2.4Select appropriate volume of material to meet specifications, making allowances for material shrinkage and oxidisation
3 Operate heating equipment
- 3.1Set up and safely operate the heating equipment to meet job requirements
- 3.2Operate heating equipment to minimise oxidisation
- 3.3Control heat to specified areas
Performance evidence
- follow work instructions, standard operating procedures (SOPs) and safe work practices
- select and use hand tools, forming tools, anvil tools, and floor tools
- select and apply hand forging techniques
- determine correct forging temperatures
- operate heating equipment safely and effectively to hand forge materials to meet job requirements
Knowledge evidence
- safe work practices and procedures and use of personal protective equipment (PPE)
- features and use of the range of hand tools, forming tools, anvil tools, and floor tools used in hand forging
- hand forging techniques, including drawing, tapering, swaging, bending, upsetting, spreading, punching, drifting, twisting, forming, offsetting, and scarf preparation and fire welding
- calculations used to determine mean diameter, length and circumference
- sources of information on forging temperatures
- heat specifications for various materials
- effects of and allowances for material shrinkage and oxidisation
- principles, safety considerations and basic operation of diesel, electric, induction, gas, solid-fuel, oil-fuel, ceramic-chip, and oxy-fuel heating equipment
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing MEM06010
What does an assessment tool for MEM06010 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM06010 needs to address all 24 unit components: 3 elements with 11 performance criteria, 5 performance evidence requirements, 8 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for MEM06010?
Auditori pulls the current release of MEM06010 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM06010 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing MEM06010 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM06010, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
- MEM03001 — Perform manual production assembly
- MEM03002 — Perform precision assembly
- MEM03003 — Perform sheet and plate assembly
- MEM03004 — Perform electronic/electrical assembly (production)
- MEM03005 — Rework and repair (electrical/electronic production)
- MEM03006 — Set assembly stations
- MEM04001 — Operate melting furnaces
- MEM04002 — Perform gravity die casting
- MEM04003 — Operate pressure die casting machine
- MEM04004 — Prepare and mix sand for metal moulding
- MEM04006 — Operate sand moulding and core making machines
- MEM04007 — Pour molten metal
Your MEM06010 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate MEM06010 free