MEM05088 — Perform welds to code standards using oxy fuel gas welding process

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MEM05088 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MEM05088 must cover

32 assessable components: 3 elements (14 performance criteria), 8 performance evidence and 10 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine job requirements

1.1Follow standard operating procedures (SOPs)
1.2Comply with work health and safety (WHS) requirements at all times
1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
1.4Identify job requirements from weld procedure specifications (WPS), customer requirements, drawings, job sheets or work instructions
1.5Obtain WPS clarification or approval of variation to WPS from appropriate person in accordance with SOPs

2 Prepare welding materials and equipment for oxy fuel gas welding to code standard

2.1Prepare materials to produce weld to code standard
2.2Perform routine maintenance on welding equipment
2.3Set up welding equipment
2.4Select consumables in accordance with WPS

3 Weld joints using oxy fuel gas welding to procedure specifications

3.1Weld materials in accordance with WPS
3.2Apply post-welding heat treatment where specified
3.3Inspect welded joints visually for conformance to specifications
3.4Rectify discontinuities to ensure compliance to code requirements
3.5Maintain weld records in accordance with SOPs

Performance evidence

follow work instructions, standard operating procedures (SOPs) and safe work practices
identify and interpret job specifications and weld parameters from drawings, weld procedure specifications, sketches and verbal or written job instructions for performing welds using oxy fuel gas welding to code standards
clean and prepare materials for welding to specifications on at least two occasions
set up welding equipment and perform routine maintenance
produce butt and fillet welds in the flat, horizontal, vertical and overhead positions to meet customer specifications and the requirements of AS 1210 Pressure vessels, AS 4041 Pressure piping and American Society of Engineers (ASME) IX or equivalent national or international standards on at least two occasions
rectify identified weld discontinuities on at least two occasions
complete and maintain weld records related to oxy fuel gas welding to code standards onto standard workplace forms.
Note: Where a volume and/or frequency is not specified, demonstration must be provided at least once.

Knowledge evidence

safe welding practices and procedures and use of personal protective equipment (PPE)
requirements to produce welds to quality of AS 1210 Pressure vessels, AS 4041 Pressure piping and ASME IX or equivalent
AS 1796 Certification of welders and welding supervisors or equivalent national and international standards relevant to oxy fuel gas welding
standards or codes relevant to oxy fuel gas welding
causes and control of distortion when welding to code standards
purpose of and setting up requirements of: gas cylinders, hoses, blowpipes, tips and nozzles, regulators, flashback arrestors
methods for preparing plate for code standard welding
causes of weld defects and methods of rectification
pre-welding and post-welding heating methods and requirements for plate welding to code standard
requirements for maintaining weld records to code standard.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MEM05088

What does an assessment tool for MEM05088 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM05088 needs to address all 32 unit components: 3 elements with 14 performance criteria, 8 performance evidence requirements, 10 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEM05088?

Auditori pulls the current release of MEM05088 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM05088 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEM05088 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM05088, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MEM05088 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MEM05088 free