CPPCLO4107 — Remediate mould contaminated structures and contents

1 Inspect and assess site for mould damage.

• 1.1Clarify site access, areas to be restored and scope of work with building owner, client, insurer or supervisor.
• 1.2Select, check for fit and serviceability, and use personal protective equipment (PPE) according to WHS and job requirements.
• 1.3Determine normal mould levels expected for the site given the location, construction, age and type of building.
• 1.4Identify visible and invisible mould above normal levels and other potentially affected areas according to job requirements.
• 1.5Assess site hazards, risks and contamination and determine control measures, including containment and engineering controls required, according to WHS requirements.
• 1.6Investigate materials and construction of affected structure and contents to determine if disposal is required or restoration is viable.
• 1.7Seek specialist advice, where required, according to job, organisational and legislative requirements.
• 1.8Document condition of area to be restored and advise client, building owner or insurer of the results of the assessment, proposed remediation methods, risks and likely outcomes and seek approval to proceed according to organisational requirements.

2 Prepare to undertake mould remediation.

• 2.1Determine remediation methods, equipment and sequence of tasks and potential restoration outcomes according to WHS and organisational requirements.
• 2.2Position safety signage, barriers, containment and engineering controls and confirm that area is safe to access and work in according to WHS and job requirements.
• 2.3Remove structural elements that may impede the remediation process according to work role, WHS and job requirements.
• 2.4Identify and dispose of surfaces and materials that are unable to be remediated according to organisational and WHS requirements.

3 Treat salvageable contents and structural surfaces.

• 3.1Remove items to an off-site facility for treatment, where necessary, according to job and organisational requirements.
• 3.2Treat mould when cause has been removed according to organisational and WHS requirements.
• 3.3Clean and deodorise salvageable surfaces on site and in an off-site facility according to job, WHS and organisational requirements.
• 3.4Reduce invisible mould spores to minimise future mould breakouts by applying an approved disinfectant according to manufacturer instructions.

4 Evaluate outcomes of mould remediation activities.

• 4.1Determine the need for post-remediation testing and, if required, arrange testing according to industry accepted practice and organisational procedures.
• 4.2Determine further action or advice required based on evaluation or test results.
• 4.3Conduct repeat remediation, if needed, according to organisational and job requirements.

5 Complete work activities.

• 5.1Record site remediation and seek independent verification or sign-off, as required, according to job and WHS requirements.
• 5.2Remove safety signage barriers, containment and engineering controls and dispose of soil and waste according to WHS and environmental requirements.
• 5.3Clean and/or dispose of PPE as required by organisational requirements.
• 5.4Check remediation equipment for faults, wear or damage and report according to organisational requirements.
• 5.5Store equipment and materials according to organisational requirements.
• 5.6Advise client of strategies to prevent future mould proliferation and contamination according to organisational requirements.

What does an assessment tool for CPPCLO4107 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for CPPCLO4107 needs to address all 48 unit components: 5 elements with 25 performance criteria, 4 performance evidence requirements, 19 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for CPPCLO4107?

Auditori pulls the current release of CPPCLO4107 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for CPPCLO4107 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing CPPCLO4107 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of CPPCLO4107, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.