CPCCON3048 — Construct tilt panels on site

1 Plan and prepare to construct tilt panels on site.

• 1.1Interpret tilt panel design specifications and drawings and clarify construction requirements with relevant persons.
• 1.2Plan work tasks to comply with relevant legislation, regulations, standards, codes, work health and safety (WHS), environmental and workplace requirements.
• 1.3Select and fit required personal protective equipment (PPE).
• 1.4Inspect work site, assess hazards and apply risk controls, including required signage and barricades.
• 1.5Select plant, tools and equipment, check for serviceability and rectify or report any faults.
• 1.6Calculate and acquire material quantities to meet task specifications and safely locate materials ready for use.

2 Set out and construct temporary casting bed.

• 2.1Select suitable area to construct casting bed in accordance with work instructions.
• 2.2Prepare ground to a flat surface in readiness for casting bed.
• 2.3Place and finish casting bed to meet work instructions.
• 2.4Coat casting bed with bond breaker in accordance with product specifications.

3 Set out work and prepare formwork for panel.

• 3.1Set out location and size of tilt panel in accordance with drawings and specifications.
• 3.2Prepare, place and fix tilt panel edge formwork, and plumb and align to specifications.
• 3.3Apply bond breaker to casting bed face or casting form face of previous panel to ensure ease of panel separation, in accordance with manufacturer requirements for dose and quantity.
• 3.4Apply form release agent to formwork in accordance with specifications.

4 Place and tie reinforcement and cast-in fittings

• 4.1Check reinforcement, accessories and cast-in fittings for conformity with design and engineering specifications.
• 4.2Position reinforcement, accessories and cast-in fittings in accordance with engineering drawings and specifications.
• 4.3Tie reinforcement in correct placement in accordance with engineering drawings and specifications.

5 Place, finish and cure concrete.

• 5.1Place concrete evenly and consolidate to specification using approved vibration method.
• 5.2Screed and finish concrete surface to specification ensuring cast-in fittings are clear.
• 5.3Apply required curing process.
• 5.4Strip edge formwork after final panel is cast, ensuring no damage to panels.

6 Clean up.

• 6.1Clear work area and dispose of, reuse or recycle materials in accordance with regulatory and workplace requirements.
• 6.2Clean, check, maintain and store plant, tools and equipment in accordance with manufacturer and workplace requirements.

What does an assessment tool for CPCCON3048 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for CPCCON3048 needs to address all 50 unit components: 6 elements with 23 performance criteria, 5 performance evidence requirements, 22 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for CPCCON3048?

Auditori pulls the current release of CPCCON3048 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for CPCCON3048 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing CPCCON3048 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of CPCCON3048, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.