CPCCBL3013 — Construct masonry structural systems

1 Prepare for work.

• 1.1Select, fit correctly and use personal protective equipment (PPE) appropriate for job.
• 1.2Read, identify and apply masonry structural systems requirements from current plans, specifications, standards and codes.
• 1.3Follow requirements in workplace safety and environmental documentation and workplace procedures.
• 1.4Use measurements and apply formulas to calculate material quantities.
• 1.5Determine job priorities and sequence job tasks in consultation with others on site.
• 1.6Identify potential hazards and determine and implement control measures.
• 1.7Select and check condition of plant, equipment and tools and report damage or faults.
• 1.8Check conformity of materials against the specifications and place materials in preparation for the work.

2 Set out load bearing walls.

• 2.1Set out and mark masonry wall and engaged piers.
• 2.2Set out blockwork bond and gauge and the location of horizontal reinforcing and articulated joints.

3 Construct load bearing walls with engaged piers.

• 3.1Mix mortar to meet job requirements.
• 3.2Lay blocks to set out height between control joints, maintaining bond and centring starter bars.
• 3.3Install horizontal reinforcing to specified bed joints.
• 3.4Lay attached piers with reinforcing to set out height.
• 3.5Install and secure roof tie down, bracing and vertical support.
• 3.6Clean and prepare blockwork for formwork and core filling.

4 Clean and finish mortar joints.

• 4.1Finish joints to specified profile and depth to meet current Australian Standards.
• 4.2Brush down face of blockwork prior to drying to remove unwanted mortar.

5 Clean up.

• 5.1Clear the work area, and dispose of, reuse or recycle materials following workplace and environmental requirements.
• 5.2Clean tools and equipment, check for serviceability and report damage or faults.
• 5.3Store and secure tools and equipment following workplace procedures.

What does an assessment tool for CPCCBL3013 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for CPCCBL3013 needs to address all 36 unit components: 5 elements with 21 performance criteria, 6 performance evidence requirements, 8 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for CPCCBL3013?

Auditori pulls the current release of CPCCBL3013 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for CPCCBL3013 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing CPCCBL3013 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of CPCCBL3013, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.