AVIW5013 — Operate air traffic control equipment and workstations
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for AVIW5013 must cover
60 assessable components: 4 elements (15 performance criteria), 21 performance evidence and 24 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Operate communications equipment
- 1.1Air-ground communications channels are operated
- 1.2Selective call and priority channels are operated
- 1.3Communications equipment is appropriately configured
- 1.4Communications malfunctions are recognised, reported and/or rectified
- 1.5Communications alarms and warning messages are actioned
2 Operate surveillance equipment
- 2.1Surveillance system data is interpreted for pertinent operational information
- 2.2Surveillance malfunctions are recognised, reported and/or rectified
- 2.3Surveillance alarms and warning messages are actioned
3 Use flight progress strips or flight data records
- 3.1FPSs or FDRs are manipulated to reflect current and future air traffic situation
- 3.2FPSs or FDRs are archived in accordance with workplace procedures
- 3.3FPSs or FDRs are included in scan pattern and cross-referenced for accuracy
4 Operate ancillary equipment
- 4.1Ancillary equipment is configured and operated to tasks
- 4.2Ancillary equipment data is interpreted for pertinent operational information, and processed as required
- 4.3Ancillary equipment malfunctions are recognised and reported
- 4.4Ancillary equipment alarms and warning messages are actioned
Performance evidence
- allocating attention according to priorities
- applying reasoning and decision making when using air traffic control (ATC) equipment and facilities
- assessing and manipulating message queues
- communicating effectively with others
- completing relevant documentation for using ATC equipment and workstations
- configuring ancillary equipment
- configuring operational equipment
- formatting, sending and receiving messages
- identifying and applying precautions and required actions to minimise, control or eliminate identified hazards
- implementing contingency plans
- interpreting and responding to displayed flight information
- monitoring equipment serviceability
- operating the following ATC equipment:
- air traffic communications
- air traffic surveillance
- ancillary equipment
- air traffic workstations
- perceiving and comprehending incoming information
- recognising and reporting identified problems in a timely manner
- using conflict recognition tools
- working systematically with required attention to detail
Knowledge evidence
- aeronautical databases
- air situation display
- ATC equipment and workstations
- alerts, alarms and warning messages
- allocation of secondary surveillance radar (SSR) codes
- ancillary equipment functions, configurations, data sources and limitations
- communications equipment functions, configurations, data sources and limitations
- communications range and footprints through, and adjacent to, the area of jurisdiction and adjoining frequencies
- configuration, uses and limitations of flight progress strips (FPSs) and flight data records (FDRs)
- degraded modes
- graphic aids
- information recorded using prescribed format
- mandated memory prompts
- maps and charts
- procedures and protocols for operating equipment and workstations
- procedures for facility failures
- relevant sections of regulatory and operational documentation
- requirements for checking and testing equipment, including frequencies
- responsibilities for system, equipment and facilities operation
- surveillance equipment and its limitations
- surveillance range and footprints through, and adjacent to, the area of jurisdiction
- systems architecture
- workplace safety requirements for workplace equipment setup and use
- workstation layout and ergonomics
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing AVIW5013
What does an assessment tool for AVIW5013 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for AVIW5013 needs to address all 60 unit components: 4 elements with 15 performance criteria, 21 performance evidence requirements, 24 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for AVIW5013?
Auditori pulls the current release of AVIW5013 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for AVIW5013 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing AVIW5013 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of AVIW5013, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
- AVIW0001 — Operate and manage advanced remote pilot aircraft systems
- AVIW0004 — Perform operational inspections on remote operated systems
- AVIW0005 — Determine meteorological factors for remote pilot aircraft operations
- AVIW0006 — Perform infrastructure inspections using remote operated systems
- AVIW0007 — Perform aerial mapping and modelling using remote piloted aircraft systems
- AVIW0008 — Conduct aerial search using remote piloted aircraft
- AVIW0009 — Conduct aerial delivery/retrieval operations using remote piloted aircraft systems
- AVIW0011 — Operate baggage tug
- AVIW0012 — Operate aircraft refuelling nozzle
- AVIW0017 — Operate aircraft embarkation and disembarkation equipment
- AVIW0018 — Operate ramp equipment
- AVIW0020 — Refuel aircraft
Your AVIW5013 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate AVIW5013 free