AURTTE007 — Dismantle and assemble single cylinder four-stroke petrol engines

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate AURTTE007 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for AURTTE007 must cover

56 assessable components: 6 elements (25 performance criteria), 1 performance evidence and 22 knowledge evidence requirements, plus 8 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Prepare to dismantle and re-assemble a single cylinder four-stroke petrol engine

1.1Safety and environmental requirements are sourced and interpreted
1.2Task instruction is interpreted and engine to be worked on is identified
1.3Manufacturer specifications and workplace procedures for engine dismantle and assembly are sourced and interpreted
1.4Potential hazards and risks associated with task are identified and reported to workplace supervisor
1.5Tools and equipment required for dismantling and assembling four-stroke petrol engine are identified according to manufacturer specifications

2 Dismantle engine and clean its components

2.1Tools, equipment and materials are selected and checked prior to use according to manufacturer specifications and safety requirements
2.2Engine is cleaned according to manufacturer specifications and workplace procedures
2.3Engine is dismantled without causing damage to components, tools or equipment
2.4Engine components are cleaned and arranged for identification according to workplace procedures

3 Identify, inspect and measure engine components

3.1Measuring equipment and tools are selected and checked according to manufacturer specifications and workplace safety procedures
3.2Engine components are measured and results compared against manufacturer specifications
3.3Engine bearing information is sourced and interpreted, and engine bearing type and associated loads are identified
3.4Information on engine seals, sealants and gaskets is sourced and interpreted, and engine seals, sealants and gaskets are identified
3.5Engine component inspection results are recorded

4 Inspect engine cooling system and components and identify type

4.1Information on the function, type, and components of cooling system is sourced and interpreted
4.2Cooling system components are identified and inspected according to manufacturer specifications
4.3Cooling system component inspection results are recorded

5 Re-assemble engine and perform operational tests

5.1Engine components are prepared for assembly according to manufacturer specifications and safety and environmental requirements
5.2Engine is assembled according to manufacturer specifications, and without causing damage to components, tools and equipment
5.3Engine is tested for correct assembly and operation
5.4Engine assembly and testing procedures are recorded

6 Complete work processes

6.1Final inspection is made to ensure work meets task instruction and workplace standards, and engine is presented ready for use or storage according to workplace procedures
6.2Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures
6.3Tools and equipment are checked and stored in a condition ready for use according to workplace procedures, or tagged and reported where necessary
6.4Workplace documentation is processed according to workplace procedures

Performance evidence

dismantle and assemble at least two different single cylinder four-stroke petrol engines.

Knowledge evidence

key aspects of work health and safety (WHS), occupational health and safety (OHS) and environmental requirements, including: use of safety glasses, ear protection and safety footwear
key aspects of work health and safety (WHS), occupational health and safety (OHS) and environmental requirements, including: use of engine dismantling and re-assembly equipment
key aspects of work health and safety (WHS), occupational health and safety (OHS) and environmental requirements, including: collection and disposal of used engine lubricants and coolant
types of engines and engine operating principles for: four and two-stroke engines
types of engines and engine operating principles for: single and multi-cylinder configuration
construction and operating principles of single cylinder four-stroke engine and functions of their major components
functions of the lubricating system
components of the lubricating system and their function
functions of the cooling system
components of the cooling system and their functions
types and application of: seals
types and application of: gaskets
types and application of: bearings
dismantling procedures for engines, including: bolt loosening sequences
dismantling procedures for engines, including: procedures for noting component positions
measurement and calculation methods for: piston to bore and connecting rod bearing clearance
measurement and calculation methods for: swept volume
measurement and calculation methods for: clearance volume
measurement and calculation methods for: compression ratio and engine capacity
reassembly procedures for engines, including: bolt tightening sequences and torque requirements
reassembly procedures for engines, including: piston ring compression procedures
work area clean-up and maintenance requirements

Foundation skills

Learning: locate appropriate sources of vehicle engine information and engine dismantle and reassembly procedures.
Reading: select and interpret key information from manufacturer specifications, safety requirements and workplace procedures to safely dismantle and assemble a single cylinder four-stroke engine; select and interpret key information from environmental requirements and workplace procedures to ensure a clean and safe work site.
Writing: legibly and accurately fill out workplace documentation using correct industry terminology and conventions.
Oral communication: participate effectively in verbal exchanges using questioning and active listening to request, clarify and clearly convey information.
Numeracy: read and interpret numerical information in engine information; use specialist tools and measuring equipment correctly, including verniers and micrometers, and report and record the results correctly using relevant mathematical symbols and conventions (e.g. mm for millimeters); use basic mathematical operations, including addition, subtraction, multiplication and division, to calculate clearances and ratios.
Planning and organising: plan own work requirements and prioritise actions to achieve required outcomes.
Self-management: recognise own limitations when selecting and using tools and equipment and seek timely advice.
Problem-solving: identify potential or actual hazards and take action to minimise risk; refer problems that cannot be readily resolved and seek assistance from workplace supervisor.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing AURTTE007

What does an assessment tool for AURTTE007 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for AURTTE007 needs to address all 56 unit components: 6 elements with 25 performance criteria, 1 performance evidence requirements, 22 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for AURTTE007?

Auditori pulls the current release of AURTTE007 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for AURTTE007 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing AURTTE007 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of AURTTE007, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your AURTTE007 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate AURTTE007 free