UEPOPS141Start up a heat recovery steam generator unit

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Every new account includes a free credit — no card, no subscription.

What an assessment for UEPOPS141 must cover

44 assessable components: 5 elements (18 performance criteria), 14 performance evidence and 12 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Plan and prepare HRSG start-up work

  • 1.1Work health and safety (WHS)/occupational health and safety (OHS) regulations, legislative requirements, codes of practice, manufacturers’ recommendations and specifications, environmental requirements and workplace procedures are identified, applied and monitored
  • 1.2Work requirements are identified from relevant personnel and documentation in accordance with workplace procedures
  • 1.3Preoperational checks are carried out on plant in accordance with manufacturers’ recommendations and specifications, and workplace procedures

2 Conduct HRSG start- up

  • 2.1Preoperational conditions of the HRSG and gas turbine are established in accordance with workplace procedures
  • 2.2Minimum operation of gas turbine is established and supported in accordance with manufacturers’ recommendations and specifications, and workplace procedures
  • 2.3Monitoring of HRSG drum level, feedwater flow, steam and metal temperature rates of rise, steam pressure rate of rise and control of steam flow and drainage is carried out in accordance with manufacturers’ recommendations and specifications, and workplace procedures
  • 2.4Exhaust temperature, flow to HRSG and gas turbine power output are adjusted to achieve required steam conditions and demand in accordance workplace procedures
  • 2.5HRSG plant is operated within limits of design in accordance with workplace procedures
  • 2.6HRSG plant is monitored to detect deviations from required operating conditions in accordance with workplace procedures
  • 2.7Corrective action is taken to rectify HRSG abnormalities in accordance with manufacturers’ recommendations and specifications, and workplace procedures

3 Test HRSG plant operation

  • 3.1Tests are performed in accordance with workplace procedures
  • 3.2HRSG plant is observed for correct operational response in accordance with workplace procedures
  • 3.3HRSG plant is returned to required operational status upon completion of testing in accordance with workplace procedures

4 Analyse HRSG faults

  • 4.1Causes of abnormal HRSG plant operating conditions are identified by analysing technical and operational information in accordance with workplace procedures
  • 4.2HRSG plant integrity and personnel safety are maintained through consultation with relevant personnel and technical and operational documentation in accordance with workplace procedures
  • 4.3Relevant personnel are notified when defects are detected in accordance with workplace procedures

5 Complete documentation

  • 5.1HRSG plant problems, movements and status are reported in accordance with workplace procedures
  • 5.2Documentation is updated in accordance with workplace procedures

Performance evidence

  • applying work health and safety (WHS)/occupational health and safety (OHS) legislated requirements, including: emergency procedures, risk control measures, safe working practices
  • communicating with personnel
  • identifying heat recovery steam generator (HRSG) plant status
  • implementing regulations, legislative requirements, codes of practice, manufacturers’ recommendations and specifications, and environmental requirements
  • interpreting manuals
  • monitoring and operating HRSG plant and equipment
  • organising resources
  • planning and preparing HRSG plant and equipment for start and run-up operations
  • recognising and responding to abnormal HRSG plant operating conditions
  • starting, running-up and operating HRSG and associated plant and equipment
  • testing HRSG plant operation using diagnostic and data analysis techniques and tools to determine faults
  • using recording procedures to complete documentation
  • utilising temperature and pressure raising techniques
  • working with permit to work system

Knowledge evidence

  • arrangements of power production plant
  • control of heat transfer and rate of temperature rise during HRSG start-up
  • HRSG plant and equipment, location and operating parameters
  • manuals
  • operational testing of HRSG plant
  • permit to work system
  • regulations, legislative requirements, codes of practice, manufacturers’ recommendations and specifications, and environmental requirements
  • techniques HRSG plant and equipment operation
  • temperature and pressure raising requirements
  • WHS/OHS requirements, including: emergency procedures, risk control measures, safe working practices and principles
  • workplace policies and procedures
  • workplace documentation

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing UEPOPS141

What does an assessment tool for UEPOPS141 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEPOPS141 needs to address all 44 unit components: 5 elements with 18 performance criteria, 14 performance evidence requirements, 12 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEPOPS141?

Auditori pulls the current release of UEPOPS141 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEPOPS141 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEPOPS141 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEPOPS141, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your UEPOPS141 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate UEPOPS141 free