UEPOPS098 — Operate and monitor gas production plant
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for UEPOPS098 must cover
42 assessable components: 6 elements (18 performance criteria), 15 performance evidence and 9 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Plan and prepare work
- 1.1Work health and safety (WHS)/occupational health and safety (OHS) regulations, legislative requirements, codes of practice, manufacturers’ recommendations and specifications, environmental requirements and workplace procedures are identified, applied and monitored
- 1.2Work requirements are identified from relevant personnel and documentation in accordance with workplace procedures
- 1.3Documentation to determine gas production plant status is assessed and evaluated in accordance with workplace procedures
- 1.4Inspection and field preparation for gas production service are carried out in accordance with manufacturers’ recommendations and specifications, and workplace procedures
- 1.5Gas production plant operational prerequisites are established in accordance with manufacturers’ recommendations and specifications, and workplace procedures
- 1.6Sequence for recommissioning of gas production plant is determined in accordance with workplace procedures
2 Operate gas production plant
- 2.1Gas production plant is operated in accordance with manufacturers’ recommendations and specifications, and workplace procedures
- 2.2Gas production plant is monitored and observed to detect deviations from normal operating conditions in accordance with workplace procedures
- 2.3Corrective actions are taken to rectify abnormalities in accordance with manufacturers’ recommendations and specifications, and workplace procedures
3 Test gas production plant operation
- 3.1Operational tests are performed in accordance with workplace procedures
- 3.2Gas production plant is observed for operational response in accordance with workplace procedures
- 3.3Gas production plant is returned to required operational status upon completion of test in accordance with workplace procedures
4 Analyse gas production plant faults
- 4.1Causes of abnormal gas production plant operating conditions are identified and by analysing technical and operational information in accordance with workplace procedures
- 4.2Gas production plant integrity and personnel safety is maintained in consultation with relevant personnel and technical and operational documentation in accordance with workplace procedures
5 Monitor and inspect gas production plant
- 5.1Gas production plant is monitored and inspected for normal operation and to detect deviations in accordance with workplace procedures
- 5.2Relevant personnel are notified when defects are detected in accordance with workplace procedures
6 Complete documentation
- 6.1Gas production plant problems, movements, abnormalities and status are reported in accordance with workplace procedures
- 6.2Documentation is updated in accordance with workplace procedures
Performance evidence
- analysing gas production plant faults using data analysis techniques and tools
- applying work health and safety (WHS)/occupational health and safety (OHS) requirements, including: emergency procedures, risk control measures, safe working practices
- communicating with personnel
- completing documentation using recording procedures
- identifying gas production plant status
- implementing regulations, legislative requirements, codes of practice, manufacturers’ recommendations and specifications, and environmental requirements
- interpreting manuals
- monitoring and inspecting gas production plant operations
- operating gas production plant
- organising resources
- preparing and planning work
- preparing gas production plant and equipment for operation
- recognising and responding to abnormal gas production plant operating conditions
- testing gas production plant operations using diagnostic and testing techniques
- working with permit to work system
Knowledge evidence
- arrangements of power production plant
- gas production plant and equipment, location and operating parameters
- gas production plant status
- manuals
- permit to work system
- regulations, legislative requirements, codes of practice, manufacturers’ recommendations and specifications, and environmental requirements
- WHS/OHS requirements, including: emergency procedures, risk control measures, safe working practices
- workplace documentation
- workplace policies and procedures
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing UEPOPS098
What does an assessment tool for UEPOPS098 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEPOPS098 needs to address all 42 unit components: 6 elements with 18 performance criteria, 15 performance evidence requirements, 9 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for UEPOPS098?
Auditori pulls the current release of UEPOPS098 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEPOPS098 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing UEPOPS098 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEPOPS098, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
- UEPOPS001 — Analyse single protection device operation
- UEPOPS002 — Apply environmental and sustainable energy procedures
- UEPOPS003 — Apply quality systems to work
- UEPOPS004 — Carry out operational checks on in-service electrical plant
- UEPOPS005 — Clean plant and equipment
- UEPOPS006 — Collect and analyse hydrological and meteorological data
- UEPOPS007 — Conduct chemical batching operations
- UEPOPS008 — Operate and monitor control room site in a multi-function environment
- UEPOPS009 — Conduct minor electrical maintenance
- UEPOPS010 — Conduct minor mechanical maintenance
- UEPOPS011 — Conduct multiple energy source isolation procedures for permit to work
- UEPOPS012 — Conduct non-routine operational testing
Your UEPOPS098 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate UEPOPS098 free