UEPOPS048 — Manage commissioning and decommissioning

1 Plan and prepare for work

• 1.1Commissioning and decommissioning management plan tasks are identified from relevant personnel and site inspection in accordance with workplace procedures
• 1.2Work health and safety (WHS)/occupational health and safety (OHS) regulations, legislative requirements, codes of practice, manufacturers’ recommendations and specifications, environmental requirements and workplace procedures are identified, applied and monitored
• 1.3Resources to comply with commissioning and decommissioning management plan are obtained and inspected for compliance in accordance with workplace procedures
• 1.4Relevant plans, drawings and manuals in the commissioning and decommissioning management plan are used in accordance with workplace procedures
• 1.5Commissioning and decommissioning work is sequenced and prioritised in accordance with management plan and workplace procedures
• 1.6Isolations and sequencing are managed in accordance management plan and workplace procedures
• 1.7Potential hazards are identified and risk control measures implemented and managed in accordance with management plan and workplace procedures
• 1.8Work area is determined in accordance with management plan, manufacturers’ recommendations and specifications, and workplace procedures
• 1.9Roles and responsibilities are assigned and managed in accordance with management plan and workplace procedures

2 Commission plant or equipment

• 2.1Isolations are confirmed in accordance with management plan and workplace procedures
• 2.2Equipment is connected to energy or material sources in accordance with management plan and workplace procedures
• 2.3Equipment is commissioned in accordance with management plan, manufacturers’ recommendations and specifications, and workplace procedures

3 Decommission plant or equipment

• 3.1Isolations are confirmed in accordance with management plan and workplace procedures
• 3.2Equipment is disconnected from energy or material sources in accordance with management plan and workplace procedures

4 Remove and disassemble plant or equipment

• 4.1Isolations are confirmed in accordance with management plan and workplace procedures
• 4.2Removal of plant or equipment, or disassembly of major components is carried out, in accordance with management plan and workplace procedures
• 4.3Unused electrical conductors are isolated and terminated in accordance with management plan and workplace procedures
• 4.4Other sources of energy or materials are terminated and blanked in accordance with management plan and workplace procedures

5 Recommission plant or equipment

• 5.1Generation plant or equipment is de-isolated in accordance with management plan and workplace procedures
• 5.2Preoperational checks are carried out on plant or equipment in accordance with management plan, manufacturers’ recommendations and specifications, and workplace procedures
• 5.3Sequence for recommissioning procedures is managed in accordance with management plan and workplace procedures
• 5.4Generation plant or equipment is tested for operation in accordance with management plan, manufacturers’ recommendations and specifications, and workplace procedures
• 5.5Generation plant or equipment performance is monitored and tested in accordance with management plan and workplace procedures
• 5.6Data is collected and referenced and variances recorded in accordance with management plan, manufacturers’ recommendations and specifications, and workplace procedures
• 5.7Generation plant or equipment is adjusted using relevant techniques in accordance with management plan, manufacturers’ recommendations and specifications, and workplace procedures
• 5.8Final inspections and performance data is collected and recorded in accordance with management plan, manufacturers’ recommendations and specifications, and workplace procedures

6 Complete work

• 6.1Work is completed and relevant personnel are debriefed in accordance with management plan and workplace procedures
• 6.2Work area is cleared of waste in accordance with management plan and workplace procedures
• 6.3Specialist tools and equipment are maintained and stored in accordance with management plan, manufacturers’ recommendations and specifications, and workplace procedures
• 6.4Completion details, including report and recommendations are finalised, in accordance with management plan and workplace procedures

What does an assessment tool for UEPOPS048 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEPOPS048 needs to address all 58 unit components: 6 elements with 30 performance criteria, 15 performance evidence requirements, 13 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEPOPS048?

Auditori pulls the current release of UEPOPS048 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEPOPS048 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEPOPS048 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEPOPS048, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.