UEGNSG902 — Commission, operate and maintain electrolysers

1 Prepare to commission, operate, and maintain electrolysers

• 1.1Relevant manufacturers’ instructions and specifications, emergency procedures, industry codes, standards and regulations are obtained and confirmed
• 1.2Hazards and WHS/OHS risks are identified and prioritised and control measures implemented and monitored
• 1.3Relevant person/s are consulted and work is prioritised and sequenced for completion within agreed timeframes and to industry standards in accordance with workplace procedures
• 1.4Work health and safety (WHS)/occupational health and safety (OHS), environmental and sustainable energy policies and procedures for the work are obtained and applied
• 1.5Work schedule/s, drawings, plans, job requirements and material lists are obtained, analysed and site inspection conducted, as required, to determine the preparation work required for planning and coordination
• 1.6Appropriate equipment, tools and personal protective equipment (PPE) required for the job are obtained and checked for correct operation and safety in accordance with workplace procedures
• 1.7Work area is prepared to minimise risk and damage to property, commerce and individuals in accordance with job instructions, work schedule and workplace procedures
• 1.8Electrolyser and associated equipment, pipework and storage are confirmed for correct installation

2 Commission and operate electrolysers

• 2.1Regular checks are undertaken in accordance with manufacturers’ instructions and specifications, industry codes, standards and regulations
• 2.2Relevant manufacturers’ instructions and specifications, emergency procedures, industry codes, standards and regulations are implemented
• 2.3WHS/OHS risk control measures and policies and procedures are followed in accordance with workplace procedures
• 2.4Hazardous activities are performed safely in accordance with job instructions, regulatory requirements and workplace procedures, and manufacturers’ instructions and specifications.
• 2.5Electrolyser is commissioned and operated in accordance with manufacturer instructions, workplace procedures and job requirements
• 2.6Materials, tools, equipment and devices to perform the work are selected and used correctly and safely in accordance with manufacturer instructions and workplace procedures
• 2.7Unplanned events are dealt with or referred to authorised person/s for directions in accordance with level of responsibility and workplace procedures
• 2.8Alarm codes, signage and other hazard warnings are correctly recognised and WHS/OHS risks and control measures monitored, actioned and appropriate authorities consulted in accordance with requirements and workplace procedures
• 2.9Emergency shutdown procedures are applied in the event of equipment faults/failure or operational parameters being exceeded
• 2.10Quality and safety checks of the work are conducted in accordance with job requirements, industry standards and workplace procedures

3 Maintain electrolysers

• 3.1WHS/OHS risk control measures and policies and procedures are followed in accordance with workplace procedures
• 3.2Materials, tools, equipment and devices to perform the maintenance work are selected and used correctly and safely in accordance with manufacturer instructions and workplace procedures
• 3.3Systems isolation is performed, as required, in accordance with requirements and workplace procedures
• 3.4Electrolyser is maintained and parts replaced as required, in accordance with job requirements, level of responsibility, workplace procedures and manufacturer instructions
• 3.5Electrolyser is recommissioned to safe operational conditions in accordance with job requirements, workplace procedures and manufacturer instructions
• 3.6Unplanned events are dealt with or referred to authorised person/s for directions in accordance with level of responsibility and workplace procedures
• 3.7Quality and safety checks of the work are conducted in accordance with job requirements, workplace procedures and community and industry standards

4 Complete work and relevant documentation

• 4.1Work area is cleaned up, made and confirmed safe in accordance with job instructions and workplace procedures
• 4.2Tools, equipment and any surplus resources and materials are cleaned, checked and returned to storage in accordance with workplace procedures
• 4.3Relevant person/s are notified of work completion in accordance with workplace procedures
• 4.4Work completion records and report forms are completed in accordance with job instructions and workplace procedures

What does an assessment tool for UEGNSG902 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEGNSG902 needs to address all 67 unit components: 4 elements with 29 performance criteria, 19 performance evidence requirements, 19 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEGNSG902?

Auditori pulls the current release of UEGNSG902 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEGNSG902 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEGNSG902 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEGNSG902, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.