UEGNSG205 — Commission or decommission gas distribution pipelines

1 Prepare to commission/decommission

• 1.1Work health and safety (WHS)/occupational health and safety (OHS) workplace procedures and environmental measures for the site are identified, obtained and applied
• 1.2Job requirements and workplace procedures for the work are discussed with relevant person/s to confirm the work schedule
• 1.3WHS/OHS, environmental and sustainable energy policies and procedures are obtained and applied
• 1.4Work is prioritised and sequenced for completion within acceptable timeframes following consultation with relevant person/s in accordance with workplace procedures
• 1.5Hazards are identified, WHS/OHS risks are assessed and control measures prioritised, implemented, and monitored in accordance with workplace procedures
• 1.6Scope of work and level of responsibility under the relevant work permit and/or notification is confirmed with relevant person/s in accordance with job requirements and workplace procedures
• 1.7Person/s, equipment, tools and personal protective equipment (PPE) required for the work are identified, scheduled, obtained and checked for correct operation and safety in accordance with workplace procedures
• 1.8Materials, plans, diagrams, drawings and resources required for the work are scheduled and obtained in accordance with workplace procedures
• 1.9Safety and emergency procedures and responsibilities for first aid and incidents at the worksite are checked and confirmed with relevant person/s in accordance with workplace procedures
• 1.10Third-party issues are referred to relevant person/s in accordance with workplace procedures
• 1.11Pipeline is cleaned or pigged, bypassed and checked for commissioning/decommissioning readiness in accordance with workplace procedures
• 1.12Site preparation, safety plan and work schedule are confirmed with relevant person/s in accordance with workplace procedures
• 1.13Person/s participating in the work are briefed and responsibilities confirmed in accordance with job requirements and workplace procedures
• 1.14Road signs, barriers and warning devices are positioned in accordance with job requirements and traffic management plan

2 Commission/decommission gas distribution pipelines

• 2.1WHS/OHS and environmental risk control measures and workplace procedures for carrying out work are followed
• 2.2Materials, tools, equipment and testing and measuring devices required for the work are selected and used correctly and safely in accordance with manufacturer instructions and workplace procedures
• 2.3Hazardous activities are conducted safely in accordance with WHS/OHS workplace procedures, job instructions and regulatory requirements
• 2.4Pipeline purging/flaring is undertaken in accordance with job requirements, industry standards and workplace procedures
• 2.5Commissioning/decommissioning of gas distribution pipelines is performed to industry standards without waste of materials or damage to apparatus, circuits, and the surrounding environment or services using sustainable energy principles
• 2.6Gas is tested for compliance with pressure, concentration and odourant level requirements in accordance with industry standards and workplace procedures
• 2.7WHS/OHS risks are assessed and incidents reported to authorised person/s for directions in accordance with workplace procedures
• 2.8Unplanned events and non-routine problems are referred to authorised person/s for directions in accordance with workplace procedures
• 2.9Relevant reports and quality and safety checks of the work are conducted in accordance with job requirements and workplace procedures

3 Complete work and relevant documentation

• 3.1WHS/OHS and environmental risk control measures and procedures for completing the work are followed
• 3.2Testing is conducted using relevant tools/equipment and work checked against work schedule for conformance with job requirements and anomalies reported in accordance with workplace procedures
• 3.3Accidents and injuries are reported in accordance with requirements and workplace procedures
• 3.4Work site is rehabilitated, cleaned up and made safe in accordance with workplace procedures
• 3.5Tools, equipment and any surplus resources and materials are cleaned, checked and securely stored in accordance with workplace procedures
• 3.6Relevant work permit/s are signed off and equipment returned to service in accordance with workplace procedures, job and regulatory requirements
• 3.7Appropriate person/s are notified of work completion in accordance with workplace procedures
• 3.8Final inspections are undertaken and work completion documentation is finalised, processed and provided to appropriate person/s in accordance with workplace procedures

What does an assessment tool for UEGNSG205 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEGNSG205 needs to address all 78 unit components: 3 elements with 31 performance criteria, 21 performance evidence requirements, 26 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEGNSG205?

Auditori pulls the current release of UEGNSG205 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEGNSG205 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEGNSG205 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEGNSG205, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.