UEGNSG036 — Supervise and monitor contract work

1 Prepare to supervise and monitor contract staff

• 1.1Workplace safety, environmental and sustainable energy practices for the site are identified, obtained and understood
• 1.2Job requirements are obtained and interpreted from plans, specifications and instructions
• 1.3Relevant job requirements and workplace procedures for work activities are discussed with relevant person/s, including third parties, to determine and confirm work schedule and respective responsibilities
• 1.4Hazards are identified, workplace safety and environmental risks are assessed, and control measures are prioritised, implemented and monitored in accordance with workplace procedures
• 1.5Scope of responsibility under the relevant job requirements, including all work permits and/or relevant notifications, is determined and confirmed to access the services and perform work in accordance with job requirements and workplace procedures
• 1.6Equipment, tools and personal protective equipment (PPE) needed to carry out work activities are identified, obtained and checked for correct operation and safety in accordance with workplace procedures and manufacturer instructions
• 1.7Relevant work permit/s are obtained to access and perform the work in accordance with regulatory and job requirements and workplace procedures
• 1.8Contractual requirements of person/s performing the work, including relevant qualifications, competency, currency, licenses, site induction and condition of equipment, are confirmed in accordance with workplace procedures
• 1.9Person/s participating in the work, including contract staff, are briefed and responsibilities coordinated and authorised in accordance with workplace procedures
• 1.10Materials, plans, diagrams, drawings and resources required for work are confirmed and obtained in accordance with workplace procedures

2 Monitor and supervise contractor activities

• 2.1Workplace safety risk control measures and policies and procedures are followed in accordance with workplace procedures
• 2.2Hazardous activities are conducted safely in accordance with regulatory requirements and workplace procedures
• 2.3Contractor activities are monitored and supervised to ensure job completion in agreed timeframes and to industry standards with a minimum of waste in accordance with job requirements and workplace procedures
• 2.4Contractor activities are supervised in accordance with the work schedule and workplace procedures
• 2.5Alarms, codes and hazard warnings are correctly recognised, and the correct response strategy is selected and applied in accordance with workplace procedures
• 2.6Unplanned events and non-routine problems are identified and actioned in accordance with workplace procedures
• 2.7Problem-solving and troubleshooting techniques are applied to problems encountered when monitoring and supervising contractor activities
• 2.8Quality and safety checks of the contractor work are undertaken in accordance with job and regulatory requirements and workplace procedures

3 Complete monitoring and supervision records

• 3.1Workplace safety risk control measures for work completion are followed
• 3.2Inspection of the contract job is checked against work schedule for conformance with job requirements and anomalies reported in accordance with workplace procedures
• 3.3Worksite is cleaned, reinstated and made safe in accordance with workplace procedures
• 3.4Tools, equipment and any surplus resources/materials are cleaned, checked and securely stored in accordance with workplace procedures
• 3.5Incidents are reported and followed up as required in accordance with workplace procedures
• 3.6Relevant person/s is notified of work completion in accordance with workplace procedures
• 3.7Work completion documentation is completed accurately and provided to relevant person/s in accordance with workplace procedures

What does an assessment tool for UEGNSG036 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEGNSG036 needs to address all 61 unit components: 3 elements with 25 performance criteria, 16 performance evidence requirements, 20 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEGNSG036?

Auditori pulls the current release of UEGNSG036 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEGNSG036 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEGNSG036 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEGNSG036, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.