UEERS0027 — Maintain computer-based interlocking rail systems

1 Prepare to maintain CBI rail equipment

• 1.1Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are identified, obtained and clarified
• 1.2Hazards are identified, WHS/OHS risks assessed, and control measures and workplace procedures are implemented in preparation for work
• 1.3Scope of maintenance work is determined from job specifications, drawings and regulatory requirements
• 1.4The version of the signalling data and executive software of the CBI is identified by reference to the engineering records
• 1.5Materials needed for the maintenance work are obtained in accordance with workplace procedures and checked against job specifications
• 1.6Tools, equipment and testing devices needed for maintenance work are obtained in accordance with workplace procedures and checked for correct operation and safety
• 1.7Authorisation to take temporarily out of service or disable systems is obtained in accordance with workplace procedures

2 Maintain CBI rail system

• 2.1WHS/OHS risk control measures and workplace procedures for carrying out the work are followed
• 2.2On-track safe working requirements are identified and applied in accordance with workplace procedures and safety management system
• 2.3Reports or fault logs are identified and accessed
• 2.4Fault correction activities are prioritised by reviewing the fault reports and previous corrective actions
• 2.5Records of previously corrective actioned faults are managed
• 2.6Source of the fault is identified
• 2.7Corrective action required is determined and implemented
• 2.8Checking that the CBI has the correct version of the signalling data and software is completed
• 2.9System is checked for the correct version of signalling data and software if applicable part of the CBI equipment is replaced
• 2.10Appropriate mechanisms for the safe and efficient rectification of the fault are determined
• 2.11Methods for dealing with unplanned situations are determined on the basis of safety and specified work outcomes
• 2.12Rail system monitoring is conducted efficiently, without waste of materials or damage to apparatus, the surrounding environment or services using sustainable energy practices
• 2.13Replacement equipment is obtained from spare stock a required to comply with identified fault repair requirements
• 2.14Faulty component/equipment is identified and removed as required in accordance with organisation practices and procedures
• 2.15Replacement component/equipment is installed and connected to power in accordance with manufacturer specifications
• 2.16Correct test procedures are identified and implemented to confirm all operations are within specifications
• 2.17Equipment operations are monitored to ensure system integrity
• 2.18Signal and voltage levels are monitored, checked and adjusted, as required, in accordance with operational requirements
• 2.19Completed records and equipment/operational management information are accurately recorded and maintained to support ongoing monitoring of systems and equipment performance

3 Complete CBI rail system maintenance

• 3.1WHS/OHS risk control work completion measures and workplace procedures are followed
• 3.2Confirmation that system is functional and that no alarms are present or indicated
• 3.3On-track safe working requirements are removed in accordance with workplace procedures and safety management system
• 3.4Non-conforming equipment is identified and tagged for repair type and extent of fault is identified and recorded, as required
• 3.5Faulty equipment requiring repair is segregated as required and appropriate records are completed in preparation for despatching to repairer
• 3.6Spare equipment stocks are reviewed to ensure adequate availability
• 3.7Priority for repair and/or replacement of equipment is determined in consultation with authorised person by evaluation of stock levels and fault logs
• 3.8Work completion is documented and appropriate person/s notified of repair and replacement priorities in accordance with workplace procedures and relevant reports produced

What does an assessment tool for UEERS0027 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEERS0027 needs to address all 58 unit components: 3 elements with 34 performance criteria, 13 performance evidence requirements, 11 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEERS0027?

Auditori pulls the current release of UEERS0027 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEERS0027 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEERS0027 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEERS0027, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.