UEEEC0074 — Troubleshoot resonance circuits in an electronic apparatus
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for UEEEC0074 must cover
58 assessable components: 3 elements (15 performance criteria), 17 performance evidence and 26 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Prepare to troubleshoot resonance circuits
- 1.1Work health and safety (WHS)/occupational health and safety (OHS) processes and workplace procedures for a given work area are identified, obtained and applied
- 1.2WHS/OHS risk control work preparation measures and workplace procedures are followed
- 1.3Scope of fault is obtained from documentation and/or work supervisor to determine work to be undertaken
- 1.4Advice is sought from work supervisor to ensure the work is coordinated effectively with others
- 1.5Sources of materials required for work are determined in accordance with workplace procedures
- 1.6Tools, equipment and testing devices required for work are obtained and checked for correct operation and safety
2 Solve problems in resonance circuits
- 2.1WHS/OHS risk control work measures and workplace procedures are followed
- 2.2Need to test and measure live work is determined in accordance with WHS/OHS requirements and workplace procedures
- 2.3Circuits are checked and isolated in accordance with WHS/OHS requirements and workplace procedures
- 2.4Fault finding of resonance circuits is conducted using measured and calculated values of parameters in accordance with workplace procedures
- 2.5Unplanned situations are dealt with safely and with the approval of relevant person/s in accordance with workplace procedures
- 2.6Fault-finding activities are carried out efficiently without waste of materials or damage to apparatus, the surrounding environment or services using sustainable energy practices
3 Complete work and document troubleshooting activities
- 3.1WHS/OHS work completion risk control measures and workplace procedures are followed
- 3.2Worksite is cleaned and made safe in accordance with workplace procedures
- 3.3Work completion is documented and relevant person/s notified in accordance with workplace procedures
Performance evidence
- applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements, including:
- using risk control measures
- carrying out fault-finding activities without waste and damage to materials, apparatus, the environment or services
- checking and isolating circuits
- completing work and documenting troubleshooting activities
- dealing with unplanned situations safely and with the approval of relevant person/s
- demonstrating correct set-up and usage of oscilloscope for alternating current (a.c.) measurements
- obtaining and checking tools, equipment and testing devices for correct operation and safety
- obtaining scope of the fault from documentation and/or work supervisor
- preparing to troubleshoot resonance circuits
- seeking advice from work supervisor to ensure work is coordinated effectively
- solving problems in resonance circuits
- testing and measuring live circuits
- using sustainable energy practices
- calculating resonance parameters, including reactance and resonant frequency from supplied or measured values
- making measurements on resonance circuits
- making adjustments to resonance circuits
Knowledge evidence
- filter characteristics, including bandwidth, roll off, attenuation and response curves
- filter principles and types, including high pass, low pass, bandpass and band-reject
- principles of inductance and inductive reactance
- impedance, voltage and current characteristics of parallel-resonant circuits
- impedance, voltage and current characteristics of series-resonant circuits
- measuring equipment for a.c. circuits
- Ohm's law for a.c. circuits
- power factor principles
- problem-solving techniques
- quality factor (Q) principles
- relevant checking and isolation methods for circuits
- relevant circuit measurements and parameter values calculations
- relevant industry standards
- relevant job safety assessments or risk mitigation processes
- relevant manufacturer specifications and operating instructions
- relevant materials, tools, equipment and testing devices
- relevant resonance circuits
- relevant resonance formulae and definitions
- relevant testing and measuring methods
- relevant WHS/OHS legislated requirements
- relevant workplace documentation
- relevant workplace instructions, policies and procedures
- series, parallel and series-parallel a.c. circuits
- sinusoidal alternating voltage and current principles
- sustainable energy principles
- transformer principles and construction
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing UEEEC0074
What does an assessment tool for UEEEC0074 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEEEC0074 needs to address all 58 unit components: 3 elements with 15 performance criteria, 17 performance evidence requirements, 26 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for UEEEC0074?
Auditori pulls the current release of UEEEC0074 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEEEC0074 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing UEEEC0074 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEEEC0074, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
- UEEEC0001 — Analyse the performance of wireless-based electronic communication systems
- UEEEC0002 — Assemble and install reception antennae and signal distribution equipment
- UEEEC0003 — Assemble and set up basic security systems
- UEEEC0004 — Assemble and set up fixed video/audio components and systems in buildings and premises
- UEEEC0005 — Assess electronic apparatus compliance
- UEEEC0006 — Carry out repairs of predictable faults in video and audio replay/recording apparatus
- UEEEC0007 — Commission electronics and communications systems
- UEEEC0008 — Commission large fire protection systems
- UEEEC0009 — Commission satellite and microwave communication systems
- UEEEC0010 — Design and develop advanced digital systems
- UEEEC0011 — Design and develop electronics/computer systems projects
- UEEEC0012 — Design custom electronic equipment installations
Your UEEEC0074 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate UEEEC0074 free