UEECD0025 — Lay wiring/cabling and terminate accessories for extra-low voltage (ELV) circuits

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate UEECD0025 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for UEECD0025 must cover

50 assessable components: 3 elements (18 performance criteria), 17 performance evidence and 14 knowledge evidence requirements, plus 1 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Prepare to lay wiring/cabling and connect accessories for ELV circuits

1.1Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures are identified and applied
1.2Hazards are identified, risks are assessed and control measures are implemented
1.3Safety hazards not previously identified are reported on job safety assessment and advice on risk control measures is sought from the work supervisor
1.4Location of work is obtained from relevant person/s to determine scope of work
1.5Advice is sought from relevant person/s to ensure work is coordinated with others
1.6Sources of materials required for work are determined in accordance with workplace procedures
1.7Tools, equipment and testing devices required for work are obtained in accordance with workplace procedures and checked for correct operation and safety

2 Lay wiring/cabling and connect accessories for ELV circuits

2.1WHS/OHS workplace risk control measures for carrying out the work are followed
2.2Circuits/machines/plant are checked as isolated in accordance with workplace procedures
2.3Wiring and accessories are installed to comply with industry standards and job specifications with sufficient excess to affect terminations
2.4Accessories are installed straight and square in the required locations and within acceptable tolerances
2.5Cables and conductors are terminated at accessories in accordance with manufacturer specifications and relevant industry standards
2.6Cables installed for future service are marked and terminated in compliance with relevant industry standards and workplace procedures
2.7Unplanned events are responded to in accordance with workplace procedures and approval of immediate supervisor
2.8Cable installation and termination is carried out without wasting materials, damaging apparatus, circuits or the surrounding environment using sustainable energy practices

3 Complete and report work activity

3.1WHS/OHS completion risk control measures and workplace procedures are followed
3.2Worksite is cleaned and made safe in accordance with workplace procedures
3.3Work completion is documented and relevant person/s notified in accordance with workplace procedures

Performance evidence

applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements, including implementing risk control measures
applying sustainable energy principles and practices
cleaning worksite
completing and reporting work activities
dealing with unplanned events/situations in accordance with workplace procedures in a manner that minimises risk to personnel and equipment
determining nature of work activities
installing cables and accessories to specifications
laying wiring/cabling and connecting accessories for extra-low voltage (ELV) circuits
marking cables for future service using workplace procedures
notifying and documenting completion of work using workplace procedures
obtaining location of work
preparing to lay wiring/cabling and connecting accessories for ELV circuits
reporting safety hazards not previously identified on job safety assessment
seeking advice from relevant person/s
selecting appropriate tools, equipment, testing devices, cables and accessories
sourcing materials required for work activities
terminating cables, conductors and accessories to manufacturer specifications and requirements

Knowledge evidence

cable protection and support method and accessories, including: - requirements to protect and support cables adequately - protection against mechanical damage, protection from adverse temperatures and corrosion and protection from magnetic field that may affect the performance of the cable - cable support and protection devices, accessories and typical applications - metallic and non-metallic conduits, duct and trunking, cable ladder and tray, cable clips and ties and related accessories - installation techniques - cable installation equipment and cable drawing and hauling techniques
basic cable and conductor terminations, including: - insulation removal and replacement - conductor handling and cable terminations including general aspects and soldering involving pins on electronic components and stranded conductors carrying current up to 25 amperes (A) - application of connecting devices for conductors and terminals - continuity through connections and insulation resistance testing - stress release on cables/conductors
environmental and heritage regulation effecting electrotechnology work, including: - purpose of environmental and heritage regulation - typical issues affecting electrotechnology services and systems - meeting requirements - environmental regulations effecting electrotechnology work
ELV wiring
techniques for installing cables in buildings, structures and premises, including: - building construction method and construction sequence - typical cable routes through buildings, structures and premises - building codes affecting the installation of cables in buildings, structures and premises - limitation on penetration structural elements and maintenance of fire protection interiority - cable segregation requirements
technical industry standards, regulations and codes of practice related to ELV work, including: - limitation imposed by regulations - how to read and apply a standard - aspects of technical standards that apply to extra-low voltage work
types of cables used in the electrotechnology industry and their application, including: - structural components of cables and their purpose - conductors and conductor material, insulation, sheathings and servings - application of various cables types - cable variates - single cables, flexible cables, flexible cords, shielded cables, armoured cables, ribbon cables, other similar and like cables - typical characteristics and use of power circuit cables and control circuit cables
relevant job safety assessments, including risk control measures
relevant manufacturer specifications
relevant tools, equipment and testing devices
relevant WHS/OHS legislated requirements
relevant workplace documentation
relevant workplace policies and procedures
sustainable energy principles and practices

Foundation skills

Foundation skills: Foundation skills essential to performance are explicit in the performance criteria of this unit of competency.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing UEECD0025

What does an assessment tool for UEECD0025 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEECD0025 needs to address all 50 unit components: 3 elements with 18 performance criteria, 17 performance evidence requirements, 14 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEECD0025?

Auditori pulls the current release of UEECD0025 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEECD0025 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEECD0025 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEECD0025, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your UEECD0025 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate UEECD0025 free